#543 Issue closed: issue rear recovery with emc networker

Labels: support / question

yunsr opened issue at 2015-02-03 11:04:

take an OS (SLES 11 sp3 ) backup/recovery with rear/NSR (8.1). there are several san disks.
in local.conf added option:

OUTPUT=ISO
BACKUP=NSR
ONLY_INCLUDE_VG=( "system" )  <- local VG

(same manipulation with backup on nfs share work fine - restored OS successfully)

rear -v mkrescue >
Relax-and-Recover 1.16.1 / Git
Using log file: /var/log/rear/rear-linux-g7.log
Creating disk layout
Excluding Volume Group sap3
Excluding Volume Group sap2
Excluding Volume Group sap1
Creating root filesystem layout
EMC Networker will recover these filesystems: /sbin /dev /lib64 /boot /usr /mnt /media /root /lib /nsr /selinux /srv /lost+found /tmp /var /opt /bin /etc /home
TIP: To login as root via ssh you need to set up /root/.ssh/authorized_keys or SSH_ROOT_PASSWORD in your configuration file
Copying files and directories
Copying binaries and libraries
Copying kernel modules
Creating initramfs
Making ISO image
Wrote ISO image: /var/lib/rear/output/rear-linux-g7.iso (111M)
Saving result files with NSR (EMC NetWorker)
If the RETENTION_TIME="Month" is too low please add RETENTION_TIME variable in /etc/rear/local.conf
 pool           retent  name
============================
Default         03/03/15 /var/lib/rear/output/rear-linux-g7.iso

When trying to recover there is issue:

cat rear-linux-g7.log
2015-02-03 12:21:26 Relax-and-Recover 1.16.1 / Git
2015-02-03 12:21:26 Command line options: /bin/rear -v recover
2015-02-03 12:21:26 Using log file: /var/log/rear/rear-linux-g7.log
2015-02-03 12:21:26 Including /etc/rear/os.conf
2015-02-03 12:21:26 Including conf/Linux-i386.conf
2015-02-03 12:21:26 Including conf/GNU/Linux.conf
2015-02-03 12:21:26 Including conf/SUSE_LINUX.conf
2015-02-03 12:21:26 Including /etc/rear/local.conf
2015-02-03 12:21:26 Including /etc/rear/rescue.conf
2015-02-03 12:21:26 Using build area '/tmp/rear.jUBZxqgQdcamUJV'
mkdir: created directory `/tmp/rear.jUBZxqgQdcamUJV/rootfs'
mkdir: created directory `/tmp/rear.jUBZxqgQdcamUJV/tmp'
2015-02-03 12:21:26 Running recover workflow
2015-02-03 12:21:26 Running 'setup' stage
2015-02-03 12:21:26 Including setup/default/01_pre_recovery_script.sh
2015-02-03 12:21:26 Finished running 'setup' stage in 0 seconds
2015-02-03 12:21:26 Running 'verify' stage
2015-02-03 12:21:26 Including verify/default/02_cciss_scsi_engage.sh
2015-02-03 12:21:26 Including verify/default/02_translate_url.sh
2015-02-03 12:21:26 Including verify/default/03_translate_tape.sh
2015-02-03 12:21:26 Including verify/default/04_validate_variables.sh
2015-02-03 12:21:26 Including verify/GNU/Linux/05_sane_recovery_check.sh
2015-02-03 12:21:26 Including verify/GNU/Linux/23_storage_and_network_modules.sh
find: `/lib/modules/3.0.76-0.11-default/kernel/drivers/xen': No such file or directory
find: `/lib/modules/3.0.76-0.11-default/extra': No such file or directory
find: `/lib/modules/3.0.76-0.11-default/weak-updates': No such file or directory
2015-02-03 12:21:26 Including verify/GNU/Linux/26_recovery_storage_drivers.sh
find: `/tmp/rear.jUBZxqgQdcamUJV/tmp/dev': No such file or directory
--- /var/lib/rear/recovery/storage_drivers      2015-02-03 11:52:24.000000000 +0200
+++ /tmp/rear.jUBZxqgQdcamUJV/tmp/storage_drivers       2015-02-03 12:21:26.292158786 +0200
@@ -2,13 +2,7 @@
 hpsa
 iscsi_boot_sysfs
 libiscsi
-linear
 qla2xxx
-scsi_dh
-scsi_dh_alua
-scsi_dh_emc
-scsi_dh_hp_sw
-scsi_dh_rdac
 scsi_mod
 scsi_tgt
 scsi_transport_fc
2015-02-03 12:21:26 NOTICE: Will do driver migration
2015-02-03 12:21:26 Including verify/NSR/default/40_verify_nsr.sh
2015-02-03 12:21:26 Skipping ping test
2015-02-03 12:21:26 EMC NetWorker server NSRSERVER=nw-win
2015-02-03 12:21:26 Including verify/NSR/default/41_verify_nsr_paths.sh
2015-02-03 12:21:26 We will recover the following file systems from EMC NetWorker: /sbin /dev /lib64 /boot /usr /mnt /media /root /lib /nsr /selinux /srv /lost+found /tmp /var /opt /bin /etc /home
2015-02-03 12:21:26 Finished running 'verify' stage in 0 seconds
2015-02-03 12:21:26 Running 'layout/prepare' stage
2015-02-03 12:21:26 Including layout/prepare/default/01_prepare_files.sh
2015-02-03 12:21:26 Including layout/prepare/GNU/Linux/10_include_partition_code.sh
2015-02-03 12:21:26 Including layout/prepare/GNU/Linux/11_include_lvm_code.sh
2015-02-03 12:21:26 Including layout/prepare/GNU/Linux/12_include_raid_code.sh
2015-02-03 12:21:26 Including layout/prepare/GNU/Linux/13_include_filesystem_code.sh
2015-02-03 12:21:26 Including layout/prepare/GNU/Linux/14_include_swap_code.sh
2015-02-03 12:21:26 Including layout/prepare/GNU/Linux/15_include_drbd_code.sh
2015-02-03 12:21:26 Including layout/prepare/GNU/Linux/16_include_luks_code.sh
2015-02-03 12:21:26 Including layout/prepare/GNU/Linux/17_include_hpraid_code.sh
2015-02-03 12:21:26 Including layout/prepare/default/20_recreate_hpraid.sh
2015-02-03 12:21:26 Including layout/prepare/GNU/Linux/21_load_multipath.sh
2015-02-03 12:21:26 Including layout/prepare/default/25_compare_disks.sh
2015-02-03 12:21:26 Comparing disks.
2015-02-03 12:21:26 Looking for sda...
2015-02-03 12:21:26 Device sda exists.
2015-02-03 12:21:26 Size of device sda matches.
2015-02-03 12:21:26 Disk configuration is identical, proceeding with restore.
2015-02-03 12:21:26 Including layout/prepare/default/30_map_disks.sh
2015-02-03 12:21:26 Including layout/prepare/default/31_remove_exclusions.sh
2015-02-03 12:21:26 Including layout/prepare/default/32_apply_mappings.sh
2015-02-03 12:21:26 Including layout/prepare/default/40_autoresize_disks.sh
2015-02-03 12:21:26 Including layout/prepare/default/50_confirm_layout.sh
2015-02-03 12:21:26 Including layout/prepare/default/51_list_dependencies.sh
2015-02-03 12:21:26 Including layout/prepare/default/52_exclude_components.sh
2015-02-03 12:21:26 Including layout/prepare/default/54_generate_device_code.sh
2015-02-03 12:21:26 Including layout/prepare/default/55_finalize_script.sh
2015-02-03 12:21:26 Including layout/prepare/default/60_show_unprocessed.sh
2015-02-03 12:21:26 Including layout/prepare/default/61_exclude_from_restore.sh
2015-02-03 12:21:26 Finished running 'layout/prepare' stage in 0 seconds
2015-02-03 12:21:26 Running 'layout/recreate' stage
2015-02-03 12:21:26 Including layout/recreate/default/10_ask_confirmation.sh
2015-02-03 12:21:26 Including layout/recreate/default/20_run_script.sh
2015-02-03 12:21:26 Start system layout restoration.
+++ create_component /dev/sda disk
+++ local device=/dev/sda
+++ local type=disk
+++ local touchfile=disk--dev-sda
+++ '[' -e /tmp/rear.jUBZxqgQdcamUJV/tmp/touch/disk--dev-sda ']'
+++ return 0
+++ Log 'Erasing MBR of disk /dev/sda'
+++ test 1 -gt 0
++++ Stamp
++++ date '+%Y-%m-%d %H:%M:%S '
+++ echo '2015-02-03 12:21:26 Erasing MBR of disk /dev/sda'
2015-02-03 12:21:26 Erasing MBR of disk /dev/sda
+++ dd if=/dev/zero of=/dev/sda bs=512 count=1
1+0 records in
1+0 records out
512 bytes (512 B) copied, 0.00019688 s, 2.6 MB/s
+++ sync
+++ LogPrint 'Creating partitions for disk /dev/sda (msdos)'
+++ Log 'Creating partitions for disk /dev/sda (msdos)'
+++ test 1 -gt 0
++++ Stamp
++++ date '+%Y-%m-%d %H:%M:%S '
+++ echo '2015-02-03 12:21:26 Creating partitions for disk /dev/sda (msdos)'
2015-02-03 12:21:26 Creating partitions for disk /dev/sda (msdos)
+++ Print 'Creating partitions for disk /dev/sda (msdos)'
+++ test 1
+++ echo -e 'Creating partitions for disk /dev/sda (msdos)'
+++ parted -s /dev/sda mklabel msdos
+++ sleep 1
+++ parted -s /dev/sda mkpart '"primary"' 262144B 164626431B
+++ sleep 1
+++ parted -s /dev/sda set 1 boot on
+++ parted -s /dev/sda mkpart '"primary"' 164626432B 146778619903B
+++ sleep 1
+++ parted -s /dev/sda set 2 lvm on
+++ partprobe -s /dev/sda
/dev/sda: msdos partitions 1 2
+++ sleep 10
+++ my_udevtrigger
+++ has_binary udevadm
+++ for bin in '$@'
+++ type udevadm
+++ return 0
+++ udevadm trigger
+++ my_udevsettle
+++ has_binary udevadm
+++ for bin in '$@'
+++ type udevadm
+++ return 0
+++ udevadm settle
+++ component_created /dev/sda disk
+++ local device=/dev/sda
+++ local type=disk
+++ local touchfile=disk--dev-sda
+++ touch /tmp/rear.jUBZxqgQdcamUJV/tmp/touch/disk--dev-sda
+++ create_component /dev/sda1 part
+++ local device=/dev/sda1
+++ local type=part
+++ local touchfile=part--dev-sda1
+++ '[' -e /tmp/rear.jUBZxqgQdcamUJV/tmp/touch/part--dev-sda1 ']'
+++ return 0
+++ component_created /dev/sda1 part
+++ local device=/dev/sda1
+++ local type=part
+++ local touchfile=part--dev-sda1
+++ touch /tmp/rear.jUBZxqgQdcamUJV/tmp/touch/part--dev-sda1
+++ create_component /dev/sda2 part
+++ local device=/dev/sda2
+++ local type=part
+++ local touchfile=part--dev-sda2
+++ '[' -e /tmp/rear.jUBZxqgQdcamUJV/tmp/touch/part--dev-sda2 ']'
+++ return 0
+++ component_created /dev/sda2 part
+++ local device=/dev/sda2
+++ local type=part
+++ local touchfile=part--dev-sda2
+++ touch /tmp/rear.jUBZxqgQdcamUJV/tmp/touch/part--dev-sda2
+++ create_component pv:/dev/sda2 lvmdev
+++ local device=pv:/dev/sda2
+++ local type=lvmdev
+++ local touchfile=lvmdev-pv:-dev-sda2
+++ '[' -e /tmp/rear.jUBZxqgQdcamUJV/tmp/touch/lvmdev-pv:-dev-sda2 ']'
+++ return 0
+++ LogPrint 'Creating LVM PV /dev/sda2'
+++ Log 'Creating LVM PV /dev/sda2'
+++ test 1 -gt 0
++++ Stamp
++++ date '+%Y-%m-%d %H:%M:%S '
+++ echo '2015-02-03 12:21:40 Creating LVM PV /dev/sda2'
2015-02-03 12:21:40 Creating LVM PV /dev/sda2
+++ Print 'Creating LVM PV /dev/sda2'
+++ test 1
+++ echo -e 'Creating LVM PV /dev/sda2'
+++ lvm vgchange -a n system
+++ lvm pvcreate -ff --yes -v --uuid Y2WjZn-cTVf-qABG-1I3N-poxg-OBE2-xecIcu --restorefile /var/lib/rear/layout/lvm/system.cfg /dev/sda2
    connect() failed on local socket: No such file or directory
    Internal cluster locking initialisation failed.
    WARNING: Falling back to local file-based locking.
    Volume Groups with the clustered attribute will be inaccessible.
  WARNING: Forcing physical volume creation on /dev/sda2 of volume group "system"
    Set up physical volume for "/dev/sda2" with 286355456 available sectors
    Writing physical volume data to disk "/dev/sda2"
  Incorrect metadata area header checksum on /dev/sda2 at offset 4096
    Wiping cache of LVM-capable devices
  Incorrect metadata area header checksum on /dev/sda2 at offset 4096
  get_pv_from_vg_by_id: vg_read_internal failed to read VG system
  Physical volume "/dev/sda2" successfully created
+++ component_created pv:/dev/sda2 lvmdev
+++ local device=pv:/dev/sda2
+++ local type=lvmdev
+++ local touchfile=lvmdev-pv:-dev-sda2
+++ touch /tmp/rear.jUBZxqgQdcamUJV/tmp/touch/lvmdev-pv:-dev-sda2
+++ create_component /dev/system lvmgrp
+++ local device=/dev/system
+++ local type=lvmgrp
+++ local touchfile=lvmgrp--dev-system
+++ '[' -e /tmp/rear.jUBZxqgQdcamUJV/tmp/touch/lvmgrp--dev-system ']'
+++ return 0
+++ LogPrint 'Restoring LVM VG system'
+++ Log 'Restoring LVM VG system'
+++ test 1 -gt 0
++++ Stamp
++++ date '+%Y-%m-%d %H:%M:%S '
+++ echo '2015-02-03 12:21:40 Restoring LVM VG system'
2015-02-03 12:21:40 Restoring LVM VG system
+++ Print 'Restoring LVM VG system'
+++ test 1
+++ echo -e 'Restoring LVM VG system'
+++ '[' -e /dev/system ']'
+++ rm -rf /dev/system
+++ lvm vgcfgrestore -f /var/lib/rear/layout/lvm/system.cfg system
  Restored volume group system
+++ lvm vgchange --available y system
  3 logical volume(s) in volume group "system" now active
+++ component_created /dev/system lvmgrp
+++ local device=/dev/system
+++ local type=lvmgrp
+++ local touchfile=lvmgrp--dev-system
+++ touch /tmp/rear.jUBZxqgQdcamUJV/tmp/touch/lvmgrp--dev-system
+++ create_component /dev/mapper/system-home lvmvol
+++ local device=/dev/mapper/system-home
+++ local type=lvmvol
+++ local touchfile=lvmvol--dev-mapper-system-home
+++ '[' -e /tmp/rear.jUBZxqgQdcamUJV/tmp/touch/lvmvol--dev-mapper-system-home ']'
+++ return 0
+++ component_created /dev/mapper/system-home lvmvol
+++ local device=/dev/mapper/system-home
+++ local type=lvmvol
+++ local touchfile=lvmvol--dev-mapper-system-home
+++ touch /tmp/rear.jUBZxqgQdcamUJV/tmp/touch/lvmvol--dev-mapper-system-home
+++ create_component /dev/mapper/system-root lvmvol
+++ local device=/dev/mapper/system-root
+++ local type=lvmvol
+++ local touchfile=lvmvol--dev-mapper-system-root
+++ '[' -e /tmp/rear.jUBZxqgQdcamUJV/tmp/touch/lvmvol--dev-mapper-system-root ']'
+++ return 0
+++ component_created /dev/mapper/system-root lvmvol
+++ local device=/dev/mapper/system-root
+++ local type=lvmvol
+++ local touchfile=lvmvol--dev-mapper-system-root
+++ touch /tmp/rear.jUBZxqgQdcamUJV/tmp/touch/lvmvol--dev-mapper-system-root
+++ create_component /dev/mapper/system-swap lvmvol
+++ local device=/dev/mapper/system-swap
+++ local type=lvmvol
+++ local touchfile=lvmvol--dev-mapper-system-swap
+++ '[' -e /tmp/rear.jUBZxqgQdcamUJV/tmp/touch/lvmvol--dev-mapper-system-swap ']'
+++ return 0
+++ component_created /dev/mapper/system-swap lvmvol
+++ local device=/dev/mapper/system-swap
+++ local type=lvmvol
+++ local touchfile=lvmvol--dev-mapper-system-swap
+++ touch /tmp/rear.jUBZxqgQdcamUJV/tmp/touch/lvmvol--dev-mapper-system-swap
+++ create_component fs:/ fs
+++ local device=fs:/
+++ local type=fs
+++ local touchfile=fs-fs:-
+++ '[' -e /tmp/rear.jUBZxqgQdcamUJV/tmp/touch/fs-fs:- ']'
+++ return 0
+++ LogPrint 'Creating ext3-filesystem / on /dev/mapper/system-root'
+++ Log 'Creating ext3-filesystem / on /dev/mapper/system-root'
+++ test 1 -gt 0
++++ Stamp
++++ date '+%Y-%m-%d %H:%M:%S '
+++ echo '2015-02-03 12:21:40 Creating ext3-filesystem / on /dev/mapper/system-root'
2015-02-03 12:21:40 Creating ext3-filesystem / on /dev/mapper/system-root
+++ Print 'Creating ext3-filesystem / on /dev/mapper/system-root'
+++ test 1
+++ echo -e 'Creating ext3-filesystem / on /dev/mapper/system-root'
+++ mkfs -t ext3 -b 4096 -i 16384 /dev/mapper/system-root
mke2fs 1.41.9 (22-Aug-2009)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
655360 inodes, 2621440 blocks
131072 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=2684354560
80 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
        32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632

Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done

This filesystem will be automatically checked every 35 mounts or
180 days, whichever comes first.  Use tune2fs -c or -i to override.
+++ tune2fs -U de14e46c-48fe-4786-b3d6-af712e671dda /dev/mapper/system-root
tune2fs 1.41.9 (22-Aug-2009)
+++ tune2fs -m 5 -c -1 -i 0d /dev/mapper/system-root
tune2fs 1.41.9 (22-Aug-2009)
Setting maximal mount count to -1
Setting interval between checks to 0 seconds
Setting reserved blocks percentage to 5% (131072 blocks)
+++ LogPrint 'Mounting filesystem /'
+++ Log 'Mounting filesystem /'
+++ test 1 -gt 0
++++ Stamp
++++ date '+%Y-%m-%d %H:%M:%S '
+++ echo '2015-02-03 12:21:41 Mounting filesystem /'
2015-02-03 12:21:41 Mounting filesystem /
+++ Print 'Mounting filesystem /'
+++ test 1
+++ echo -e 'Mounting filesystem /'
+++ mkdir -p /mnt/local/
+++ mount -o rw,acl,user_xattr /dev/mapper/system-root /mnt/local/
+++ component_created fs:/ fs
+++ local device=fs:/
+++ local type=fs
+++ local touchfile=fs-fs:-
+++ touch /tmp/rear.jUBZxqgQdcamUJV/tmp/touch/fs-fs:-
+++ create_component fs:/boot fs
+++ local device=fs:/boot
+++ local type=fs
+++ local touchfile=fs-fs:-boot
+++ '[' -e /tmp/rear.jUBZxqgQdcamUJV/tmp/touch/fs-fs:-boot ']'
+++ return 0
+++ LogPrint 'Creating ext3-filesystem /boot on /dev/sda1'
+++ Log 'Creating ext3-filesystem /boot on /dev/sda1'
+++ test 1 -gt 0
++++ Stamp
++++ date '+%Y-%m-%d %H:%M:%S '
+++ echo '2015-02-03 12:21:42 Creating ext3-filesystem /boot on /dev/sda1'
2015-02-03 12:21:42 Creating ext3-filesystem /boot on /dev/sda1
+++ Print 'Creating ext3-filesystem /boot on /dev/sda1'
+++ test 1
+++ echo -e 'Creating ext3-filesystem /boot on /dev/sda1'
+++ mkfs -t ext3 -b 1024 -i 4092 /dev/sda1
mke2fs 1.41.9 (22-Aug-2009)
Filesystem label=
OS type: Linux
Block size=1024 (log=0)
Fragment size=1024 (log=0)
40320 inodes, 160512 blocks
8025 blocks (5.00%) reserved for the super user
First data block=1
Maximum filesystem blocks=67371008
20 block groups
8192 blocks per group, 8192 fragments per group
2016 inodes per group
Superblock backups stored on blocks:
        8193, 24577, 40961, 57345, 73729

Writing inode tables: done
Creating journal (4096 blocks): done
Writing superblocks and filesystem accounting information: done

This filesystem will be automatically checked every 37 mounts or
180 days, whichever comes first.  Use tune2fs -c or -i to override.
+++ tune2fs -U 5931eb89-3fab-4c2a-840e-98ec7870888d /dev/sda1
tune2fs 1.41.9 (22-Aug-2009)
+++ tune2fs -m 4 -c -1 -i 0d /dev/sda1
tune2fs 1.41.9 (22-Aug-2009)
Setting maximal mount count to -1
Setting interval between checks to 0 seconds
Setting reserved blocks percentage to 4% (6420 blocks)
+++ LogPrint 'Mounting filesystem /boot'
+++ Log 'Mounting filesystem /boot'
+++ test 1 -gt 0
++++ Stamp
++++ date '+%Y-%m-%d %H:%M:%S '
+++ echo '2015-02-03 12:21:43 Mounting filesystem /boot'
2015-02-03 12:21:43 Mounting filesystem /boot
+++ Print 'Mounting filesystem /boot'
+++ test 1
+++ echo -e 'Mounting filesystem /boot'
+++ mkdir -p /mnt/local/boot
+++ mount -o rw,acl,user_xattr /dev/sda1 /mnt/local/boot
+++ component_created fs:/boot fs
+++ local device=fs:/boot
+++ local type=fs
+++ local touchfile=fs-fs:-boot
+++ touch /tmp/rear.jUBZxqgQdcamUJV/tmp/touch/fs-fs:-boot
+++ create_component fs:/home fs
+++ local device=fs:/home
+++ local type=fs
+++ local touchfile=fs-fs:-home
+++ '[' -e /tmp/rear.jUBZxqgQdcamUJV/tmp/touch/fs-fs:-home ']'
+++ return 0
+++ LogPrint 'Creating ext3-filesystem /home on /dev/mapper/system-home'
+++ Log 'Creating ext3-filesystem /home on /dev/mapper/system-home'
+++ test 1 -gt 0
++++ Stamp
++++ date '+%Y-%m-%d %H:%M:%S '
+++ echo '2015-02-03 12:21:43 Creating ext3-filesystem /home on /dev/mapper/system-home'
2015-02-03 12:21:43 Creating ext3-filesystem /home on /dev/mapper/system-home
+++ Print 'Creating ext3-filesystem /home on /dev/mapper/system-home'
+++ test 1
+++ echo -e 'Creating ext3-filesystem /home on /dev/mapper/system-home'
+++ mkfs -t ext3 -b 4096 -i 16384 /dev/mapper/system-home
mke2fs 1.41.9 (22-Aug-2009)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
1638400 inodes, 6553600 blocks
327680 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=4294967296
200 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
        32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
        4096000

Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done

This filesystem will be automatically checked every 39 mounts or
180 days, whichever comes first.  Use tune2fs -c or -i to override.
+++ tune2fs -U cf31e45b-1dff-411b-a5a1-a6613867832a /dev/mapper/system-home
tune2fs 1.41.9 (22-Aug-2009)
+++ tune2fs -m 4 -c -1 -i 0d /dev/mapper/system-home
tune2fs 1.41.9 (22-Aug-2009)
Setting maximal mount count to -1
Setting interval between checks to 0 seconds
Setting reserved blocks percentage to 4% (262144 blocks)
+++ LogPrint 'Mounting filesystem /home'
+++ Log 'Mounting filesystem /home'
+++ test 1 -gt 0
++++ Stamp
++++ date '+%Y-%m-%d %H:%M:%S '
+++ echo '2015-02-03 12:21:45 Mounting filesystem /home'
2015-02-03 12:21:45 Mounting filesystem /home
+++ Print 'Mounting filesystem /home'
+++ test 1
+++ echo -e 'Mounting filesystem /home'
+++ mkdir -p /mnt/local/home
+++ mount -o rw,acl,user_xattr /dev/mapper/system-home /mnt/local/home
+++ component_created fs:/home fs
+++ local device=fs:/home
+++ local type=fs
+++ local touchfile=fs-fs:-home
+++ touch /tmp/rear.jUBZxqgQdcamUJV/tmp/touch/fs-fs:-home
+++ create_component swap:/dev/mapper/system-swap swap
+++ local device=swap:/dev/mapper/system-swap
+++ local type=swap
+++ local touchfile=swap-swap:-dev-mapper-system-swap
+++ '[' -e /tmp/rear.jUBZxqgQdcamUJV/tmp/touch/swap-swap:-dev-mapper-system-swap ']'
+++ return 0
+++ LogPrint 'Creating swap on /dev/mapper/system-swap'
+++ Log 'Creating swap on /dev/mapper/system-swap'
+++ test 1 -gt 0
++++ Stamp
++++ date '+%Y-%m-%d %H:%M:%S '
+++ echo '2015-02-03 12:21:46 Creating swap on /dev/mapper/system-swap'
2015-02-03 12:21:46 Creating swap on /dev/mapper/system-swap
+++ Print 'Creating swap on /dev/mapper/system-swap'
+++ test 1
+++ echo -e 'Creating swap on /dev/mapper/system-swap'
+++ mkswap -U 2de6d07a-a744-4129-b766-fc69c3f3aa12 /dev/mapper/system-swap
mkswap: /dev/mapper/system-swap: warning: don't erase bootbits sectors
        on whole disk. Use -f to force.
Setting up swapspace version 1, size = 2097148 KiB
no label, UUID=2de6d07a-a744-4129-b766-fc69c3f3aa12
+++ component_created swap:/dev/mapper/system-swap swap
+++ local device=swap:/dev/mapper/system-swap
+++ local type=swap
+++ local touchfile=swap-swap:-dev-mapper-system-swap
+++ touch /tmp/rear.jUBZxqgQdcamUJV/tmp/touch/swap-swap:-dev-mapper-system-swap
+++ set +x
2015-02-03 12:21:46 Disk layout created.
2015-02-03 12:21:46 Including layout/recreate/default/25_verify_mount.sh
2015-02-03 12:21:46 Finished running 'layout/recreate' stage in 20 seconds
2015-02-03 12:21:46 Running 'restore' stage
2015-02-03 12:21:46 Including restore/NSR/default/40_restore_with_nsr.sh
2015-02-03 12:21:46 Starting nsrwatch on console 8
2015-02-03 12:21:46 Restore filesystem /sbin /dev /lib64 /boot /usr /mnt /media /root /lib /nsr /selinux /srv /lost+found /tmp /var /opt /bin /etc /home  with recover
2015-02-03 12:25:21 Including restore/default/90_create_missing_directories.sh
2015-02-03 12:25:21 Including restore/SUSE_LINUX/91_create_missing_directories.sh
2015-02-03 12:25:21 Finished running 'restore' stage in 215 seconds
2015-02-03 12:25:21 Running 'finalize' stage
2015-02-03 12:25:21 Including finalize/default/01_prepare_checks.sh
2015-02-03 12:25:21 Including finalize/default/10_populate_dev.sh
2015-02-03 12:25:21 Including finalize/GNU/Linux/15_migrate_disk_devices_layout.sh
2015-02-03 12:25:21 Including finalize/GNU/Linux/15_migrate_uuid_tags.sh
2015-02-03 12:25:21 Including finalize/GNU/Linux/16_rename_diskbyid.sh
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
2015-02-03 12:25:21 Including finalize/SUSE_LINUX/i386/17_rebuild_initramfs.sh
/usr/share/rear/finalize/SUSE_LINUX/i386/17_rebuild_initramfs.sh: line 16: /mnt/local/etc/sysconfig/kernel: No such file or directory
2015-02-03 12:25:21 ERROR: Could not source '/mnt/local/etc/sysconfig/kernel'
=== Stack trace ===
Trace 0: /bin/rear:249 main
Trace 1: /usr/share/rear/lib/recover-workflow.sh:34 WORKFLOW_recover
Trace 2: /usr/share/rear/lib/framework-functions.sh:81 SourceStage
Trace 3: /usr/share/rear/lib/framework-functions.sh:42 Source
Trace 4: /usr/share/rear/finalize/SUSE_LINUX/i386/17_rebuild_initramfs.sh:17 source
Trace 5: /usr/share/rear/lib/_input-output-functions.sh:132 StopIfError
Message: Could not source '/mnt/local/etc/sysconfig/kernel'
===================
2015-02-03 12:25:21 Running exit tasks.
2015-02-03 12:25:21 The following jobs are still active:
[1]+  2456 Running                 TERM=linux nsrwatch -p 1 -s $(cat $VAR_DIR/recovery/nsr_server ) < /dev/tty8 > /dev/tty8 &
/usr/share/rear/lib/_input-output-functions.sh: line 58:  2456 Killed                  TERM=linux nsrwatch -p 1 -s $(cat $VAR_DIR/recovery/nsr_server ) < /dev/tty8 > /dev/tty8
2015-02-03 12:25:22 Finished in 237 seconds
2015-02-03 12:25:22 Removing build area /tmp/rear.jUBZxqgQdcamUJV
rmdir: removing directory, `/tmp/rear.jUBZxqgQdcamUJV'
2015-02-03 12:25:22 End of program reached

gdha commented at 2015-02-03 14:56:

@yunsr is your DR system is still alive? If yes please show the content of /mnt/local/etc/sysconfig and /tmp/diskbyid_mappings. Could you also check if on your production system the file /etc/sysconfig/kernel exists or not?

yunsr commented at 2015-02-03 15:52:

sorry DR system isn't still alive. i saw that directory in /mnt/local/etc was absolutly clean. on production system file /etc/sysconfig/kernel exists.
nsrwatch on the networker side shows status pending and nothing is done

/var/lib/rear/recovery # pwd
/var/lib/rear/recovery
linux-g7:/var/lib/rear/recovery # cat diskbyid_mappings
dm-name-sap1-sap1--lv dm-5
dm-name-sap2-sap--lv2 dm-4
dm-name-sap3-sap3--lv dm-3
dm-name-system-home dm-0
dm-name-system-root dm-1
dm-name-system-swap dm-2
dm-uuid-LVM-Ar2hS3JMvbfD1CcOyCNob1CcRsN0xsWUQtuqCewYFfntbmdDt9oU66gRlU4FQLTj dm-3
dm-uuid-LVM-Ip2N3hEMp4Iuy94WW7w1HdLpE1PyT9wtGG4tG0PJSyeR93RWESG2zhL9eaBHYbxN dm-5
dm-uuid-LVM-KplB3BBEQPRV1ewIJSQpC0ruUge1Rhg72qHvYI4Rf3NguCyq9ZjsBNZIpwIQiWU4 dm-4
dm-uuid-LVM-c3I1jdCH241nfjgHv64VdnGASJsv4yJ0Bo3YgjYGq89lF4kxqs7jgRY9zIOrtIKD dm-0
dm-uuid-LVM-c3I1jdCH241nfjgHv64VdnGASJsv4yJ0sjNyZj1zhWxDPrOf6B9JbFap4aVHqnwP dm-2
dm-uuid-LVM-c3I1jdCH241nfjgHv64VdnGASJsv4yJ0yUPZXTVwgYCEwsM2A5FKZOzgK4v814RO dm-1
scsi-360050768028206eb400000000000002b sdb
scsi-360050768028206eb400000000000002c sdc
scsi-360050768028206eb400000000000002d sdd
scsi-360050768028206eb400000000000002e sde
scsi-360050768028206eb400000000000002f sdf
scsi-360050768028206eb4000000000000030 sdg
scsi-360050768028206eb4000000000000031 sdh
scsi-360050768028206eb4000000000000032 sdi
scsi-360050768028206eb4000000000000033 sdj
scsi-360050768028206eb4000000000000034 sdk
scsi-3600508b1001c0be32d16c7f3c9327040 sda
scsi-3600508b1001c0be32d16c7f3c9327040-part1 sda1
scsi-3600508b1001c0be32d16c7f3c9327040-part2 sda2
usb-HP_iLO_LUN_00_Media_0_000002660A01-0:0 sdl
usb-HP_iLO_LUN_00_Media_0_000002660A01-0:0-part1 sdl1
wwn-0x60050768028206eb400000000000002b sdb
wwn-0x60050768028206eb400000000000002c sdc
wwn-0x60050768028206eb400000000000002d sdd
wwn-0x60050768028206eb400000000000002e sde
wwn-0x60050768028206eb400000000000002f sdf
wwn-0x60050768028206eb4000000000000030 sdg
wwn-0x60050768028206eb4000000000000031 sdh
wwn-0x60050768028206eb4000000000000032 sdi
wwn-0x60050768028206eb4000000000000033 sdj
wwn-0x60050768028206eb4000000000000034 sdk
wwn-0x600508b1001c0be32d16c7f3c9327040 sda
wwn-0x600508b1001c0be32d16c7f3c9327040-part1 sda1
wwn-0x600508b1001c0be32d16c7f3c9327040-part2 sda2

yunsr commented at 2015-02-04 08:10:

second attempt:

linux-g7:~ # /usr/sbin/rear -v mkrescue
Relax-and-Recover 1.16.1 / Git
Using log file: /var/log/rear/rear-linux-g7.log
Creating disk layout
Excluding Volume Group sap3
Excluding Volume Group sap2
Excluding Volume Group sap1
Creating root filesystem layout
EMC Networker will recover these filesystems: /etc /root /srv /lib /lib64 /lost+found /sbin /var /opt /tmp /bin /dev /selinux /media /boot /home /oracle /export /nsr /mnt /usr
TIP: To login as root via ssh you need to set up /root/.ssh/authorized_keys or SSH_ROOT_PASSWORD in your configuration file
Copying files and directories
Copying binaries and libraries
Copying kernel modules
Creating initramfs
Making ISO image
Wrote ISO image: /var/lib/rear/output/rear-linux-g7.iso (111M)
Saving result files with NSR (EMC NetWorker)
If the RETENTION_TIME="Month" is too low please add RETENTION_TIME variable in /etc/rear/local.conf
 pool           retent  name
============================
Default         03/03/15 /var/lib/rear/output/rear-linux-g7.iso
Default         03/04/15 /var/lib/rear/output/rear-linux-g7.iso
linux-g7:~ # recover
Current working directory is /root/
recover> ls
 .ICEauthority          .dbus                  .exrc                  .gnome2                .gstreamer-0.10        .mozilla               .pulse-cookie          .viminfo               Desktop                bin
 .bash_history          .dmrc                  .gconf                 .gnome2_private        .gvfs                  .nautilus              .recently-used.xbel    .xsession-errors       Documents              inst-sys
 .config                .esd_auth              .gconfd                .gnupg                 .kbd                   .pulse                 .skel                  .xsession-errors.old   autoinst.xml
recover> cd /
recover> ls
 bin          dev          export       lib          lost+found   mnt          opt          proc         sbin         srv          tmp          var
 boot         etc          home         lib64        media        nsr          oracle       root         selinux      sys          usr
recover> exit

try to recover and same problem

cat diskbyid_mappings
dm-name-sap1-sap1--lv dm-5
dm-name-sap2-sap--lv2 dm-4
dm-name-sap3-sap3--lv dm-3
dm-name-system-home dm-0 dm-name-system-home
dm-name-system-root dm-1 dm-name-system-root
dm-name-system-swap dm-2 dm-name-system-swap
dm-uuid-LVM-Ar2hS3JMvbfD1CcOyCNob1CcRsN0xsWUQtuqCewYFfntbmdDt9oU66gRlU4FQLTj dm-3
dm-uuid-LVM-Ip2N3hEMp4Iuy94WW7w1HdLpE1PyT9wtGG4tG0PJSyeR93RWESG2zhL9eaBHYbxN dm-5
dm-uuid-LVM-KplB3BBEQPRV1ewIJSQpC0ruUge1Rhg72qHvYI4Rf3NguCyq9ZjsBNZIpwIQiWU4 dm-4
dm-uuid-LVM-c3I1jdCH241nfjgHv64VdnGASJsv4yJ0Bo3YgjYGq89lF4kxqs7jgRY9zIOrtIKD dm-0 dm-name-system-home
dm-uuid-LVM-c3I1jdCH241nfjgHv64VdnGASJsv4yJ0sjNyZj1zhWxDPrOf6B9JbFap4aVHqnwP dm-2 dm-name-system-swap
dm-uuid-LVM-c3I1jdCH241nfjgHv64VdnGASJsv4yJ0yUPZXTVwgYCEwsM2A5FKZOzgK4v814RO dm-1 dm-name-system-root
scsi-360050768028206eb400000000000002b sdb usb-HP_iLO_LUN_00_Media_0_000002660A01-0:0
scsi-360050768028206eb400000000000002c sdc scsi-360050768028206eb400000000000002b
scsi-360050768028206eb400000000000002d sdd scsi-360050768028206eb400000000000002c
scsi-360050768028206eb400000000000002e sde scsi-360050768028206eb400000000000002d
scsi-360050768028206eb400000000000002f sdf scsi-360050768028206eb400000000000002e
scsi-360050768028206eb4000000000000030 sdg scsi-360050768028206eb400000000000002f
scsi-360050768028206eb4000000000000031 sdh scsi-360050768028206eb4000000000000030
scsi-360050768028206eb4000000000000032 sdi scsi-360050768028206eb4000000000000031
scsi-360050768028206eb4000000000000033 sdj scsi-360050768028206eb4000000000000032
scsi-360050768028206eb4000000000000034 sdk scsi-360050768028206eb4000000000000033
scsi-3600508b1001c0be32d16c7f3c9327040 sda scsi-3600508b1001c0be32d16c7f3c9327040
scsi-3600508b1001c0be32d16c7f3c9327040-part1 sda1 scsi-3600508b1001c0be32d16c7f3c9327040-part1
scsi-3600508b1001c0be32d16c7f3c9327040-part2 sda2 scsi-3600508b1001c0be32d16c7f3c9327040-part2
usb-HP_iLO_LUN_00_Media_0_000002660A01-0:0 sdl scsi-360050768028206eb4000000000000034
usb-HP_iLO_LUN_00_Media_0_000002660A01-0:0-part1 sdl1
wwn-0x60050768028206eb400000000000002b sdb usb-HP_iLO_LUN_00_Media_0_000002660A01-0:0
wwn-0x60050768028206eb400000000000002c sdc scsi-360050768028206eb400000000000002b
wwn-0x60050768028206eb400000000000002d sdd scsi-360050768028206eb400000000000002c
wwn-0x60050768028206eb400000000000002e sde scsi-360050768028206eb400000000000002d
wwn-0x60050768028206eb400000000000002f sdf scsi-360050768028206eb400000000000002e
wwn-0x60050768028206eb4000000000000030 sdg scsi-360050768028206eb400000000000002f
wwn-0x60050768028206eb4000000000000031 sdh scsi-360050768028206eb4000000000000030
wwn-0x60050768028206eb4000000000000032 sdi scsi-360050768028206eb4000000000000031
wwn-0x60050768028206eb4000000000000033 sdj scsi-360050768028206eb4000000000000032
wwn-0x60050768028206eb4000000000000034 sdk scsi-360050768028206eb4000000000000033
wwn-0x600508b1001c0be32d16c7f3c9327040 sda scsi-3600508b1001c0be32d16c7f3c9327040
wwn-0x600508b1001c0be32d16c7f3c9327040-part1 sda1 scsi-3600508b1001c0be32d16c7f3c9327040-part1
wwn-0x600508b1001c0be32d16c7f3c9327040-part2 sda2 scsi-3600508b1001c0be32d16c7f3c9327040-part2

 cat diskbyid_mappings
dm-name-sap1-sap1--lv dm-5
dm-name-sap2-sap--lv2 dm-4
dm-name-sap3-sap3--lv dm-3
dm-name-system-home dm-0 dm-name-system-home
dm-name-system-root dm-1 dm-name-system-root
dm-name-system-swap dm-2 dm-name-system-swap
dm-uuid-LVM-Ar2hS3JMvbfD1CcOyCNob1CcRsN0xsWUQtuqCewYFfntbmdDt9oU66gRlU4FQLTj dm-3
dm-uuid-LVM-Ip2N3hEMp4Iuy94WW7w1HdLpE1PyT9wtGG4tG0PJSyeR93RWESG2zhL9eaBHYbxN dm-5
dm-uuid-LVM-KplB3BBEQPRV1ewIJSQpC0ruUge1Rhg72qHvYI4Rf3NguCyq9ZjsBNZIpwIQiWU4 dm-4
dm-uuid-LVM-c3I1jdCH241nfjgHv64VdnGASJsv4yJ0Bo3YgjYGq89lF4kxqs7jgRY9zIOrtIKD dm-0 dm-name-system-home
dm-uuid-LVM-c3I1jdCH241nfjgHv64VdnGASJsv4yJ0sjNyZj1zhWxDPrOf6B9JbFap4aVHqnwP dm-2 dm-name-system-swap
dm-uuid-LVM-c3I1jdCH241nfjgHv64VdnGASJsv4yJ0yUPZXTVwgYCEwsM2A5FKZOzgK4v814RO dm-1 dm-name-system-root
scsi-360050768028206eb400000000000002b sdb usb-HP_iLO_LUN_00_Media_0_000002660A01-0:0
scsi-360050768028206eb400000000000002c sdc scsi-360050768028206eb400000000000002b
scsi-360050768028206eb400000000000002d sdd scsi-360050768028206eb400000000000002c
scsi-360050768028206eb400000000000002e sde scsi-360050768028206eb400000000000002d
scsi-360050768028206eb400000000000002f sdf scsi-360050768028206eb400000000000002e
scsi-360050768028206eb4000000000000030 sdg scsi-360050768028206eb400000000000002f
scsi-360050768028206eb4000000000000031 sdh scsi-360050768028206eb4000000000000030
scsi-360050768028206eb4000000000000032 sdi scsi-360050768028206eb4000000000000031
scsi-360050768028206eb4000000000000033 sdj scsi-360050768028206eb4000000000000032
scsi-360050768028206eb4000000000000034 sdk scsi-360050768028206eb4000000000000033
scsi-3600508b1001c0be32d16c7f3c9327040 sda scsi-3600508b1001c0be32d16c7f3c9327040
scsi-3600508b1001c0be32d16c7f3c9327040-part1 sda1 scsi-3600508b1001c0be32d16c7f3c9327040-part1
scsi-3600508b1001c0be32d16c7f3c9327040-part2 sda2 scsi-3600508b1001c0be32d16c7f3c9327040-part2
usb-HP_iLO_LUN_00_Media_0_000002660A01-0:0 sdl scsi-360050768028206eb4000000000000034
usb-HP_iLO_LUN_00_Media_0_000002660A01-0:0-part1 sdl1
wwn-0x60050768028206eb400000000000002b sdb usb-HP_iLO_LUN_00_Media_0_000002660A01-0:0
wwn-0x60050768028206eb400000000000002c sdc scsi-360050768028206eb400000000000002b
wwn-0x60050768028206eb400000000000002d sdd scsi-360050768028206eb400000000000002c
wwn-0x60050768028206eb400000000000002e sde scsi-360050768028206eb400000000000002d
wwn-0x60050768028206eb400000000000002f sdf scsi-360050768028206eb400000000000002e
wwn-0x60050768028206eb4000000000000030 sdg scsi-360050768028206eb400000000000002f
wwn-0x60050768028206eb4000000000000031 sdh scsi-360050768028206eb4000000000000030
wwn-0x60050768028206eb4000000000000032 sdi scsi-360050768028206eb4000000000000031
wwn-0x60050768028206eb4000000000000033 sdj scsi-360050768028206eb4000000000000032
wwn-0x60050768028206eb4000000000000034 sdk scsi-360050768028206eb4000000000000033
wwn-0x600508b1001c0be32d16c7f3c9327040 sda scsi-3600508b1001c0be32d16c7f3c9327040
wwn-0x600508b1001c0be32d16c7f3c9327040-part1 sda1 scsi-3600508b1001c0be32d16c7f3c9327040-part1
wwn-0x600508b1001c0be32d16c7f3c9327040-part2 sda2 scsi-3600508b1001c0be32d16c7f3c9327040-part2
[root@nfs-test home]# cat rear-linux-g7.log
2015-02-04 09:50:02 Relax-and-Recover 1.16.1 / Git
2015-02-04 09:50:02 Command line options: /bin/rear -v recover
2015-02-04 09:50:02 Using log file: /var/log/rear/rear-linux-g7.log
2015-02-04 09:50:02 Including /etc/rear/os.conf
2015-02-04 09:50:02 Including conf/Linux-i386.conf
2015-02-04 09:50:02 Including conf/GNU/Linux.conf
2015-02-04 09:50:02 Including conf/SUSE_LINUX.conf
2015-02-04 09:50:02 Including /etc/rear/local.conf
2015-02-04 09:50:02 Including /etc/rear/rescue.conf
2015-02-04 09:50:02 Using build area '/tmp/rear.mtlsco5utZgyheQ'
mkdir: created directory `/tmp/rear.mtlsco5utZgyheQ/rootfs'
mkdir: created directory `/tmp/rear.mtlsco5utZgyheQ/tmp'
2015-02-04 09:50:02 Running recover workflow
2015-02-04 09:50:02 Running 'setup' stage
2015-02-04 09:50:02 Including setup/default/01_pre_recovery_script.sh
2015-02-04 09:50:02 Finished running 'setup' stage in 0 seconds
2015-02-04 09:50:02 Running 'verify' stage
2015-02-04 09:50:02 Including verify/default/02_cciss_scsi_engage.sh
2015-02-04 09:50:02 Including verify/default/02_translate_url.sh
2015-02-04 09:50:02 Including verify/default/03_translate_tape.sh
2015-02-04 09:50:02 Including verify/default/04_validate_variables.sh
2015-02-04 09:50:02 Including verify/GNU/Linux/05_sane_recovery_check.sh
2015-02-04 09:50:02 Including verify/GNU/Linux/23_storage_and_network_modules.sh
find: `/lib/modules/3.0.76-0.11-default/kernel/drivers/xen': No such file or directory
find: `/lib/modules/3.0.76-0.11-default/extra': No such file or directory
find: `/lib/modules/3.0.76-0.11-default/weak-updates': No such file or directory
2015-02-04 09:50:02 Including verify/GNU/Linux/26_recovery_storage_drivers.sh
find: `/tmp/rear.mtlsco5utZgyheQ/tmp/dev': No such file or directory
--- /var/lib/rear/recovery/storage_drivers      2015-02-04 09:34:00.000000000 +0200
+++ /tmp/rear.mtlsco5utZgyheQ/tmp/storage_drivers       2015-02-04 09:50:02.556388964 +0200
@@ -2,16 +2,11 @@
 hpsa
 iscsi_boot_sysfs
 libiscsi
-linear
 qla2xxx
-scsi_dh
-scsi_dh_alua
-scsi_dh_emc
-scsi_dh_hp_sw
-scsi_dh_rdac
 scsi_mod
 scsi_tgt
 scsi_transport_fc
 scsi_transport_iscsi
 sd_mod
 sg
+sr_mod
2015-02-04 09:50:02 NOTICE: Will do driver migration
2015-02-04 09:50:02 Including verify/NSR/default/40_verify_nsr.sh
2015-02-04 09:50:02 Skipping ping test
2015-02-04 09:50:02 EMC NetWorker server NSRSERVER=nw-win
2015-02-04 09:50:02 Including verify/NSR/default/41_verify_nsr_paths.sh
2015-02-04 09:50:02 We will recover the following file systems from EMC NetWorker: /etc /root /srv /lib /lib64 /lost+found /sbin /var /opt /tmp /bin /dev /selinux /media /boot /home /oracle /export /nsr /mnt /usr
2015-02-04 09:50:02 Finished running 'verify' stage in 0 seconds
2015-02-04 09:50:02 Running 'layout/prepare' stage
2015-02-04 09:50:02 Including layout/prepare/default/01_prepare_files.sh
2015-02-04 09:50:02 Including layout/prepare/GNU/Linux/10_include_partition_code.sh
2015-02-04 09:50:02 Including layout/prepare/GNU/Linux/11_include_lvm_code.sh
2015-02-04 09:50:02 Including layout/prepare/GNU/Linux/12_include_raid_code.sh
2015-02-04 09:50:02 Including layout/prepare/GNU/Linux/13_include_filesystem_code.sh
2015-02-04 09:50:02 Including layout/prepare/GNU/Linux/14_include_swap_code.sh
2015-02-04 09:50:02 Including layout/prepare/GNU/Linux/15_include_drbd_code.sh
2015-02-04 09:50:02 Including layout/prepare/GNU/Linux/16_include_luks_code.sh
2015-02-04 09:50:02 Including layout/prepare/GNU/Linux/17_include_hpraid_code.sh
2015-02-04 09:50:02 Including layout/prepare/default/20_recreate_hpraid.sh
2015-02-04 09:50:02 Including layout/prepare/GNU/Linux/21_load_multipath.sh
2015-02-04 09:50:02 Including layout/prepare/default/25_compare_disks.sh
2015-02-04 09:50:02 Comparing disks.
2015-02-04 09:50:02 Looking for sda...
2015-02-04 09:50:02 Device sda exists.
2015-02-04 09:50:02 Size of device sda matches.
2015-02-04 09:50:02 Disk configuration is identical, proceeding with restore.
2015-02-04 09:50:02 Including layout/prepare/default/30_map_disks.sh
2015-02-04 09:50:02 Including layout/prepare/default/31_remove_exclusions.sh
2015-02-04 09:50:02 Including layout/prepare/default/32_apply_mappings.sh
2015-02-04 09:50:02 Including layout/prepare/default/40_autoresize_disks.sh
2015-02-04 09:50:02 Including layout/prepare/default/50_confirm_layout.sh
2015-02-04 09:50:02 Including layout/prepare/default/51_list_dependencies.sh
2015-02-04 09:50:02 Including layout/prepare/default/52_exclude_components.sh
2015-02-04 09:50:02 Including layout/prepare/default/54_generate_device_code.sh
2015-02-04 09:50:03 Including layout/prepare/default/55_finalize_script.sh
2015-02-04 09:50:03 Including layout/prepare/default/60_show_unprocessed.sh
2015-02-04 09:50:03 Including layout/prepare/default/61_exclude_from_restore.sh
2015-02-04 09:50:03 Finished running 'layout/prepare' stage in 1 seconds
2015-02-04 09:50:03 Running 'layout/recreate' stage
2015-02-04 09:50:03 Including layout/recreate/default/10_ask_confirmation.sh
2015-02-04 09:50:03 Including layout/recreate/default/20_run_script.sh
2015-02-04 09:50:03 Start system layout restoration.
+++ create_component /dev/sda disk
+++ local device=/dev/sda
+++ local type=disk
+++ local touchfile=disk--dev-sda
+++ '[' -e /tmp/rear.mtlsco5utZgyheQ/tmp/touch/disk--dev-sda ']'
+++ return 0
+++ Log 'Erasing MBR of disk /dev/sda'
+++ test 1 -gt 0
++++ Stamp
++++ date '+%Y-%m-%d %H:%M:%S '
+++ echo '2015-02-04 09:50:03 Erasing MBR of disk /dev/sda'
2015-02-04 09:50:03 Erasing MBR of disk /dev/sda
+++ dd if=/dev/zero of=/dev/sda bs=512 count=1
1+0 records in
1+0 records out
512 bytes (512 B) copied, 0.000199323 s, 2.6 MB/s
+++ sync
+++ LogPrint 'Creating partitions for disk /dev/sda (msdos)'
+++ Log 'Creating partitions for disk /dev/sda (msdos)'
+++ test 1 -gt 0
++++ Stamp
++++ date '+%Y-%m-%d %H:%M:%S '
+++ echo '2015-02-04 09:50:03 Creating partitions for disk /dev/sda (msdos)'
2015-02-04 09:50:03 Creating partitions for disk /dev/sda (msdos)
+++ Print 'Creating partitions for disk /dev/sda (msdos)'
+++ test 1
+++ echo -e 'Creating partitions for disk /dev/sda (msdos)'
+++ parted -s /dev/sda mklabel msdos
+++ sleep 1
+++ parted -s /dev/sda mkpart '"primary"' 262144B 164626431B
+++ sleep 1
+++ parted -s /dev/sda set 1 boot on
+++ parted -s /dev/sda mkpart '"primary"' 164626432B 146778619903B
+++ sleep 1
+++ parted -s /dev/sda set 2 lvm on
+++ partprobe -s /dev/sda
/dev/sda: msdos partitions 1 2
+++ sleep 10
+++ my_udevtrigger
+++ has_binary udevadm
+++ for bin in '$@'
+++ type udevadm
+++ return 0
+++ udevadm trigger
+++ my_udevsettle
+++ has_binary udevadm
+++ for bin in '$@'
+++ type udevadm
+++ return 0
+++ udevadm settle
+++ component_created /dev/sda disk
+++ local device=/dev/sda
+++ local type=disk
+++ local touchfile=disk--dev-sda
+++ touch /tmp/rear.mtlsco5utZgyheQ/tmp/touch/disk--dev-sda
+++ create_component /dev/sda1 part
+++ local device=/dev/sda1
+++ local type=part
+++ local touchfile=part--dev-sda1
+++ '[' -e /tmp/rear.mtlsco5utZgyheQ/tmp/touch/part--dev-sda1 ']'
+++ return 0
+++ component_created /dev/sda1 part
+++ local device=/dev/sda1
+++ local type=part
+++ local touchfile=part--dev-sda1
+++ touch /tmp/rear.mtlsco5utZgyheQ/tmp/touch/part--dev-sda1
+++ create_component /dev/sda2 part
+++ local device=/dev/sda2
+++ local type=part
+++ local touchfile=part--dev-sda2
+++ '[' -e /tmp/rear.mtlsco5utZgyheQ/tmp/touch/part--dev-sda2 ']'
+++ return 0
+++ component_created /dev/sda2 part
+++ local device=/dev/sda2
+++ local type=part
+++ local touchfile=part--dev-sda2
+++ touch /tmp/rear.mtlsco5utZgyheQ/tmp/touch/part--dev-sda2
+++ create_component pv:/dev/sda2 lvmdev
+++ local device=pv:/dev/sda2
+++ local type=lvmdev
+++ local touchfile=lvmdev-pv:-dev-sda2
+++ '[' -e /tmp/rear.mtlsco5utZgyheQ/tmp/touch/lvmdev-pv:-dev-sda2 ']'
+++ return 0
+++ LogPrint 'Creating LVM PV /dev/sda2'
+++ Log 'Creating LVM PV /dev/sda2'
+++ test 1 -gt 0
++++ Stamp
++++ date '+%Y-%m-%d %H:%M:%S '
+++ echo '2015-02-04 09:50:17 Creating LVM PV /dev/sda2'
2015-02-04 09:50:17 Creating LVM PV /dev/sda2
+++ Print 'Creating LVM PV /dev/sda2'
+++ test 1
+++ echo -e 'Creating LVM PV /dev/sda2'
+++ lvm vgchange -a n system
+++ lvm pvcreate -ff --yes -v --uuid Y2WjZn-cTVf-qABG-1I3N-poxg-OBE2-xecIcu --restorefile /var/lib/rear/layout/lvm/system.cfg /dev/sda2
    connect() failed on local socket: No such file or directory
    Internal cluster locking initialisation failed.
    WARNING: Falling back to local file-based locking.
    Volume Groups with the clustered attribute will be inaccessible.
  WARNING: Forcing physical volume creation on /dev/sda2 of volume group "system"
    Set up physical volume for "/dev/sda2" with 286355456 available sectors
    Writing physical volume data to disk "/dev/sda2"
  Incorrect metadata area header checksum on /dev/sda2 at offset 4096
    Wiping cache of LVM-capable devices
  Incorrect metadata area header checksum on /dev/sda2 at offset 4096
  get_pv_from_vg_by_id: vg_read_internal failed to read VG system
  Physical volume "/dev/sda2" successfully created
+++ component_created pv:/dev/sda2 lvmdev
+++ local device=pv:/dev/sda2
+++ local type=lvmdev
+++ local touchfile=lvmdev-pv:-dev-sda2
+++ touch /tmp/rear.mtlsco5utZgyheQ/tmp/touch/lvmdev-pv:-dev-sda2
+++ create_component /dev/system lvmgrp
+++ local device=/dev/system
+++ local type=lvmgrp
+++ local touchfile=lvmgrp--dev-system
+++ '[' -e /tmp/rear.mtlsco5utZgyheQ/tmp/touch/lvmgrp--dev-system ']'
+++ return 0
+++ LogPrint 'Restoring LVM VG system'
+++ Log 'Restoring LVM VG system'
+++ test 1 -gt 0
++++ Stamp
++++ date '+%Y-%m-%d %H:%M:%S '
+++ echo '2015-02-04 09:50:17 Restoring LVM VG system'
2015-02-04 09:50:17 Restoring LVM VG system
+++ Print 'Restoring LVM VG system'
+++ test 1
+++ echo -e 'Restoring LVM VG system'
+++ '[' -e /dev/system ']'
+++ rm -rf /dev/system
+++ lvm vgcfgrestore -f /var/lib/rear/layout/lvm/system.cfg system
  Restored volume group system
+++ lvm vgchange --available y system
  3 logical volume(s) in volume group "system" now active
+++ component_created /dev/system lvmgrp
+++ local device=/dev/system
+++ local type=lvmgrp
+++ local touchfile=lvmgrp--dev-system
+++ touch /tmp/rear.mtlsco5utZgyheQ/tmp/touch/lvmgrp--dev-system
+++ create_component /dev/mapper/system-home lvmvol
+++ local device=/dev/mapper/system-home
+++ local type=lvmvol
+++ local touchfile=lvmvol--dev-mapper-system-home
+++ '[' -e /tmp/rear.mtlsco5utZgyheQ/tmp/touch/lvmvol--dev-mapper-system-home ']'
+++ return 0
+++ component_created /dev/mapper/system-home lvmvol
+++ local device=/dev/mapper/system-home
+++ local type=lvmvol
+++ local touchfile=lvmvol--dev-mapper-system-home
+++ touch /tmp/rear.mtlsco5utZgyheQ/tmp/touch/lvmvol--dev-mapper-system-home
+++ create_component /dev/mapper/system-root lvmvol
+++ local device=/dev/mapper/system-root
+++ local type=lvmvol
+++ local touchfile=lvmvol--dev-mapper-system-root
+++ '[' -e /tmp/rear.mtlsco5utZgyheQ/tmp/touch/lvmvol--dev-mapper-system-root ']'
+++ return 0
+++ component_created /dev/mapper/system-root lvmvol
+++ local device=/dev/mapper/system-root
+++ local type=lvmvol
+++ local touchfile=lvmvol--dev-mapper-system-root
+++ touch /tmp/rear.mtlsco5utZgyheQ/tmp/touch/lvmvol--dev-mapper-system-root
+++ create_component /dev/mapper/system-swap lvmvol
+++ local device=/dev/mapper/system-swap
+++ local type=lvmvol
+++ local touchfile=lvmvol--dev-mapper-system-swap
+++ '[' -e /tmp/rear.mtlsco5utZgyheQ/tmp/touch/lvmvol--dev-mapper-system-swap ']'
+++ return 0
+++ component_created /dev/mapper/system-swap lvmvol
+++ local device=/dev/mapper/system-swap
+++ local type=lvmvol
+++ local touchfile=lvmvol--dev-mapper-system-swap
+++ touch /tmp/rear.mtlsco5utZgyheQ/tmp/touch/lvmvol--dev-mapper-system-swap
+++ create_component fs:/ fs
+++ local device=fs:/
+++ local type=fs
+++ local touchfile=fs-fs:-
+++ '[' -e /tmp/rear.mtlsco5utZgyheQ/tmp/touch/fs-fs:- ']'
+++ return 0
+++ LogPrint 'Creating ext3-filesystem / on /dev/mapper/system-root'
+++ Log 'Creating ext3-filesystem / on /dev/mapper/system-root'
+++ test 1 -gt 0
++++ Stamp
++++ date '+%Y-%m-%d %H:%M:%S '
+++ echo '2015-02-04 09:50:17 Creating ext3-filesystem / on /dev/mapper/system-root'
2015-02-04 09:50:17 Creating ext3-filesystem / on /dev/mapper/system-root
+++ Print 'Creating ext3-filesystem / on /dev/mapper/system-root'
+++ test 1
+++ echo -e 'Creating ext3-filesystem / on /dev/mapper/system-root'
+++ mkfs -t ext3 -b 4096 -i 16384 /dev/mapper/system-root
mke2fs 1.41.9 (22-Aug-2009)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
655360 inodes, 2621440 blocks
131072 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=2684354560
80 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
        32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632

Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done

This filesystem will be automatically checked every 35 mounts or
180 days, whichever comes first.  Use tune2fs -c or -i to override.
+++ tune2fs -U de14e46c-48fe-4786-b3d6-af712e671dda /dev/mapper/system-root
tune2fs 1.41.9 (22-Aug-2009)
+++ tune2fs -m 5 -c -1 -i 0d /dev/mapper/system-root
tune2fs 1.41.9 (22-Aug-2009)
Setting maximal mount count to -1
Setting interval between checks to 0 seconds
Setting reserved blocks percentage to 5% (131072 blocks)
+++ LogPrint 'Mounting filesystem /'
+++ Log 'Mounting filesystem /'
+++ test 1 -gt 0
++++ Stamp
++++ date '+%Y-%m-%d %H:%M:%S '
+++ echo '2015-02-04 09:50:18 Mounting filesystem /'
2015-02-04 09:50:18 Mounting filesystem /
+++ Print 'Mounting filesystem /'
+++ test 1
+++ echo -e 'Mounting filesystem /'
+++ mkdir -p /mnt/local/
+++ mount -o rw,acl,user_xattr /dev/mapper/system-root /mnt/local/
+++ component_created fs:/ fs
+++ local device=fs:/
+++ local type=fs
+++ local touchfile=fs-fs:-
+++ touch /tmp/rear.mtlsco5utZgyheQ/tmp/touch/fs-fs:-
+++ create_component fs:/boot fs
+++ local device=fs:/boot
+++ local type=fs
+++ local touchfile=fs-fs:-boot
+++ '[' -e /tmp/rear.mtlsco5utZgyheQ/tmp/touch/fs-fs:-boot ']'
+++ return 0
+++ LogPrint 'Creating ext3-filesystem /boot on /dev/sda1'
+++ Log 'Creating ext3-filesystem /boot on /dev/sda1'
+++ test 1 -gt 0
++++ Stamp
++++ date '+%Y-%m-%d %H:%M:%S '
+++ echo '2015-02-04 09:50:18 Creating ext3-filesystem /boot on /dev/sda1'
2015-02-04 09:50:18 Creating ext3-filesystem /boot on /dev/sda1
+++ Print 'Creating ext3-filesystem /boot on /dev/sda1'
+++ test 1
+++ echo -e 'Creating ext3-filesystem /boot on /dev/sda1'
+++ mkfs -t ext3 -b 1024 -i 4092 /dev/sda1
mke2fs 1.41.9 (22-Aug-2009)
Filesystem label=
OS type: Linux
Block size=1024 (log=0)
Fragment size=1024 (log=0)
40320 inodes, 160512 blocks
8025 blocks (5.00%) reserved for the super user
First data block=1
Maximum filesystem blocks=67371008
20 block groups
8192 blocks per group, 8192 fragments per group
2016 inodes per group
Superblock backups stored on blocks:
        8193, 24577, 40961, 57345, 73729

Writing inode tables: done
Creating journal (4096 blocks): done
Writing superblocks and filesystem accounting information: done

This filesystem will be automatically checked every 38 mounts or
180 days, whichever comes first.  Use tune2fs -c or -i to override.
+++ tune2fs -U 5931eb89-3fab-4c2a-840e-98ec7870888d /dev/sda1
tune2fs 1.41.9 (22-Aug-2009)
+++ tune2fs -m 4 -c -1 -i 0d /dev/sda1
tune2fs 1.41.9 (22-Aug-2009)
Setting maximal mount count to -1
Setting interval between checks to 0 seconds
Setting reserved blocks percentage to 4% (6420 blocks)
+++ LogPrint 'Mounting filesystem /boot'
+++ Log 'Mounting filesystem /boot'
+++ test 1 -gt 0
++++ Stamp
++++ date '+%Y-%m-%d %H:%M:%S '
+++ echo '2015-02-04 09:50:19 Mounting filesystem /boot'
2015-02-04 09:50:19 Mounting filesystem /boot
+++ Print 'Mounting filesystem /boot'
+++ test 1
+++ echo -e 'Mounting filesystem /boot'
+++ mkdir -p /mnt/local/boot
+++ mount -o rw,acl,user_xattr /dev/sda1 /mnt/local/boot
+++ component_created fs:/boot fs
+++ local device=fs:/boot
+++ local type=fs
+++ local touchfile=fs-fs:-boot
+++ touch /tmp/rear.mtlsco5utZgyheQ/tmp/touch/fs-fs:-boot
+++ create_component fs:/home fs
+++ local device=fs:/home
+++ local type=fs
+++ local touchfile=fs-fs:-home
+++ '[' -e /tmp/rear.mtlsco5utZgyheQ/tmp/touch/fs-fs:-home ']'
+++ return 0
+++ LogPrint 'Creating ext3-filesystem /home on /dev/mapper/system-home'
+++ Log 'Creating ext3-filesystem /home on /dev/mapper/system-home'
+++ test 1 -gt 0
++++ Stamp
++++ date '+%Y-%m-%d %H:%M:%S '
+++ echo '2015-02-04 09:50:19 Creating ext3-filesystem /home on /dev/mapper/system-home'
2015-02-04 09:50:19 Creating ext3-filesystem /home on /dev/mapper/system-home
+++ Print 'Creating ext3-filesystem /home on /dev/mapper/system-home'
+++ test 1
+++ echo -e 'Creating ext3-filesystem /home on /dev/mapper/system-home'
+++ mkfs -t ext3 -b 4096 -i 16384 /dev/mapper/system-home
mke2fs 1.41.9 (22-Aug-2009)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
1638400 inodes, 6553600 blocks
327680 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=4294967296
200 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
        32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
        4096000

Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done

This filesystem will be automatically checked every 34 mounts or
180 days, whichever comes first.  Use tune2fs -c or -i to override.
+++ tune2fs -U cf31e45b-1dff-411b-a5a1-a6613867832a /dev/mapper/system-home
tune2fs 1.41.9 (22-Aug-2009)
+++ tune2fs -m 4 -c -1 -i 0d /dev/mapper/system-home
tune2fs 1.41.9 (22-Aug-2009)
Setting maximal mount count to -1
Setting interval between checks to 0 seconds
Setting reserved blocks percentage to 4% (262144 blocks)
+++ LogPrint 'Mounting filesystem /home'
+++ Log 'Mounting filesystem /home'
+++ test 1 -gt 0
++++ Stamp
++++ date '+%Y-%m-%d %H:%M:%S '
+++ echo '2015-02-04 09:50:22 Mounting filesystem /home'
2015-02-04 09:50:22 Mounting filesystem /home
+++ Print 'Mounting filesystem /home'
+++ test 1
+++ echo -e 'Mounting filesystem /home'
+++ mkdir -p /mnt/local/home
+++ mount -o rw,acl,user_xattr /dev/mapper/system-home /mnt/local/home
+++ component_created fs:/home fs
+++ local device=fs:/home
+++ local type=fs
+++ local touchfile=fs-fs:-home
+++ touch /tmp/rear.mtlsco5utZgyheQ/tmp/touch/fs-fs:-home
+++ create_component swap:/dev/mapper/system-swap swap
+++ local device=swap:/dev/mapper/system-swap
+++ local type=swap
+++ local touchfile=swap-swap:-dev-mapper-system-swap
+++ '[' -e /tmp/rear.mtlsco5utZgyheQ/tmp/touch/swap-swap:-dev-mapper-system-swap ']'
+++ return 0
+++ LogPrint 'Creating swap on /dev/mapper/system-swap'
+++ Log 'Creating swap on /dev/mapper/system-swap'
+++ test 1 -gt 0
++++ Stamp
++++ date '+%Y-%m-%d %H:%M:%S '
+++ echo '2015-02-04 09:50:22 Creating swap on /dev/mapper/system-swap'
2015-02-04 09:50:22 Creating swap on /dev/mapper/system-swap
+++ Print 'Creating swap on /dev/mapper/system-swap'
+++ test 1
+++ echo -e 'Creating swap on /dev/mapper/system-swap'
+++ mkswap -U 2de6d07a-a744-4129-b766-fc69c3f3aa12 /dev/mapper/system-swap
mkswap: /dev/mapper/system-swap: warning: don't erase bootbits sectors
        on whole disk. Use -f to force.
Setting up swapspace version 1, size = 2097148 KiB
no label, UUID=2de6d07a-a744-4129-b766-fc69c3f3aa12
+++ component_created swap:/dev/mapper/system-swap swap
+++ local device=swap:/dev/mapper/system-swap
+++ local type=swap
+++ local touchfile=swap-swap:-dev-mapper-system-swap
+++ touch /tmp/rear.mtlsco5utZgyheQ/tmp/touch/swap-swap:-dev-mapper-system-swap
+++ set +x
2015-02-04 09:50:22 Disk layout created.
2015-02-04 09:50:22 Including layout/recreate/default/25_verify_mount.sh
2015-02-04 09:50:22 Finished running 'layout/recreate' stage in 19 seconds
2015-02-04 09:50:22 Running 'restore' stage
2015-02-04 09:50:22 Including restore/NSR/default/40_restore_with_nsr.sh
2015-02-04 09:50:22 Starting nsrwatch on console 8
2015-02-04 09:50:22 Restore filesystem /etc /root /srv /lib /lib64 /lost+found /sbin /var /opt /tmp /bin /dev /selinux /media /boot /home /oracle /export /nsr /mnt /usr  with recover
2015-02-04 09:58:19 Including restore/default/90_create_missing_directories.sh
2015-02-04 09:58:19 Including restore/SUSE_LINUX/91_create_missing_directories.sh
2015-02-04 09:58:19 Finished running 'restore' stage in 477 seconds
2015-02-04 09:58:19 Running 'finalize' stage
2015-02-04 09:58:19 Including finalize/default/01_prepare_checks.sh
2015-02-04 09:58:19 Including finalize/default/10_populate_dev.sh
2015-02-04 09:58:19 Including finalize/GNU/Linux/15_migrate_disk_devices_layout.sh
2015-02-04 09:58:19 Including finalize/GNU/Linux/15_migrate_uuid_tags.sh
2015-02-04 09:58:19 Including finalize/GNU/Linux/16_rename_diskbyid.sh
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
2015-02-04 09:58:19 Including finalize/SUSE_LINUX/i386/17_rebuild_initramfs.sh
/usr/share/rear/finalize/SUSE_LINUX/i386/17_rebuild_initramfs.sh: line 16: /mnt/local/etc/sysconfig/kernel: No such file or directory
2015-02-04 09:58:19 ERROR: Could not source '/mnt/local/etc/sysconfig/kernel'
=== Stack trace ===
Trace 0: /bin/rear:249 main
Trace 1: /usr/share/rear/lib/recover-workflow.sh:34 WORKFLOW_recover
Trace 2: /usr/share/rear/lib/framework-functions.sh:81 SourceStage
Trace 3: /usr/share/rear/lib/framework-functions.sh:42 Source
Trace 4: /usr/share/rear/finalize/SUSE_LINUX/i386/17_rebuild_initramfs.sh:17 source
Trace 5: /usr/share/rear/lib/_input-output-functions.sh:132 StopIfError
Message: Could not source '/mnt/local/etc/sysconfig/kernel'
===================
2015-02-04 09:58:19 Running exit tasks.
2015-02-04 09:58:19 The following jobs are still active:
[1]+  2477 Running                 TERM=linux nsrwatch -p 1 -s $(cat $VAR_DIR/recovery/nsr_server ) < /dev/tty8 > /dev/tty8 &
/usr/share/rear/lib/_input-output-functions.sh: line 58:  2477 Killed                  TERM=linux nsrwatch -p 1 -s $(cat $VAR_DIR/recovery/nsr_server ) < /dev/tty8 > /dev/tty8
2015-02-04 09:58:20 Finished in 498 seconds
2015-02-04 09:58:20 Removing build area /tmp/rear.mtlsco5utZgyheQ
rmdir: removing directory, `/tmp/rear.mtlsco5utZgyheQ'
2015-02-04 09:58:20 End of program reached

in /mnt/local/ i didn't see /etc directory

networker work fine. i can without problem recover any file or directory via recovery command

gdha commented at 2015-02-04 09:57:

@yunsr If you say you can recover any file and I see in the log:

2015-02-04 09:50:22 Starting nsrwatch on console 8
2015-02-04 09:50:22 Restore filesystem /etc /root /srv /lib /lib64 /lost+found /sbin /var /opt /tmp /bin /dev /selinux /media /boot /home /oracle /export /nsr /mnt /usr with recover

why is then the directory /mnt/local/etc empty?

yunsr commented at 2015-02-04 10:10:

i can recover with networker via networker command recover or from nw server before load from rear rescue

linux-g7:~ # recover
Current working directory is /root/
recover> cd /
recover> ls
 bin          dev          export       lib          lost+found   mnt          opt          proc         sbin         srv          tmp          var
 boot         etc          home         lib64        media        nsr          oracle       root         selinux      sys          usr
recover> cd /etc
recover> add hosts
1 file(s) marked for recovery
recover> relocate
6479:recover: <return> will recover files into their original location
New destination directory: /tmp
recover> destination
recover files into /tmp
recover> recover
Recovering 1 file from /etc/ into /tmp
Volumes needed (all on-line):
        nw_win.007 at sapt4
Total estimated disk space needed for recover is 4 KB.
Requesting 1 file(s), this may take a while...
Recover start time: Wed Feb  4 12:05:14 2015
Requesting 1 recover session(s) from server.
./hosts
Received 1 file(s) from NSR server `nw-win.esx.local'
Recover completion time: Wed Feb  4 12:05:15 2015
recover>

but when i load from rescue ISO....and write rear -v recover
disk layout created
Restore filesystem /etc /root /srv /lib /lib64 /lost+found /sbin.....with networker and ...silence....
from networker server via nsrwatch i see browsing session...and that's all
networker didn't recover any files ((( i didn't see dir /etc in /mnt/local
all logs represented
any idea?

thanks

gdha commented at 2015-02-04 15:45:

So if I got it right NW is not fully functional in rear recovery mode, right?
We have seen other reports (issues #411, #429 and #387) of NW 8.1 where something got broke. The initial integration was done with NW 8.0. I suspected in the previous mentioned issues that with NW 8.1 some additional library needs to be added in the prep phase, but as I have no NW access myself I cannot help with this.
What you can do is the following:

  • boot in recovery mode
  • try to recover something from /etc/ into /mnt/local/etc and see what happens...

yunsr commented at 2015-02-04 16:10:

yes,NW 8.1 is not fully functional in rear recovery mode.

booted in recovery mode
directory /etc/ recovered into /mnt/local/etc succesfully via nw command recover (recover browses the saved file index and recovers selected files from the NetWorker system)

gdha commented at 2015-02-04 16:18:

@yunsr Ok, so when you are booted via ISO rear image you can do a recover without any issues, do I get this right? When it fails with rear recover could you check if the /mnt/local is still mounted? Just want to double check this that you are not restoring in / of the RAM image.

yunsr commented at 2015-02-04 16:25:

yes, i can do a recover without any issues. I'll check second question tomorrow

yunsr commented at 2015-02-05 08:16:

make another attempt - recover via networker 8.1

/usr/sbin/rear -v mkrescue
Relax-and-Recover 1.16.1 / Git
Using log file: /var/log/rear/rear-linux-g7.log
Creating disk layout
Excluding Volume Group sap3
Excluding Volume Group sap2
Excluding Volume Group sap1
Creating root filesystem layout
EMC Networker will recover these filesystems: / /boot /home /oracle/sap1 /home/sap2 /export/sap3
TIP: To login as root via ssh you need to set up /root/.ssh/authorized_keys or SSH_ROOT_PASSWORD in your configuration file
Copying files and directories
Copying binaries and libraries
Copying kernel modules
Creating initramfs
Making ISO image
Wrote ISO image: /var/lib/rear/output/rear-linux-g7.iso (111M)
Saving result files with NSR (EMC NetWorker)
If the RETENTION_TIME="1 day" is too low please add RETENTION_TIME variable in /etc/rear/local.conf

pool retent name

Default 03/04/15 /var/lib/rear/output/rear-linux-g7.iso

try to recover with rescue disk

1-1

didn't watch anything for about 10 min.
from networker server watched only browsing session
and then:

1-2

/mnt/local still mounted

1-3

tried to recover via nfs share...everything good. recovered succesfully

thanks

gdha commented at 2015-02-05 08:44:

could you find an error from nsr recover in the logs? Or on the nsr server?
There must be a reason for the failure...

On Thu, Feb 5, 2015 at 9:16 AM, yunsr notifications@github.com wrote:

make another attempt - recover via networker 8.1

/usr/sbin/rear -v mkrescue
Relax-and-Recover 1.16.1 / Git
Using log file: /var/log/rear/rear-linux-g7.log
Creating disk layout
Excluding Volume Group sap3
Excluding Volume Group sap2
Excluding Volume Group sap1
Creating root filesystem layout
EMC Networker will recover these filesystems: / /boot /home /oracle/sap1
/home/sap2 /export/sap3
TIP: To login as root via ssh you need to set up
/root/.ssh/authorized_keys or SSH_ROOT_PASSWORD in your configuration file
Copying files and directories
Copying binaries and libraries
Copying kernel modules
Creating initramfs
Making ISO image
Wrote ISO image: /var/lib/rear/output/rear-linux-g7.iso (111M)
Saving result files with NSR (EMC NetWorker)
If the RETENTION_TIME="1 day" is too low please add RETENTION_TIME
variable in /etc/rear/local.conf
pool retent name

Default 03/04/15 /var/lib/rear/output/rear-linux-g7.iso

try to recover with rescue disk

[image: 1-1]
https://cloud.githubusercontent.com/assets/10756657/6056832/2e64a114-ad1f-11e4-8adc-7c88e4a2bcac.png

didn't watch anything for about 10 min.
from networker server watched only browsing session
and then:

[image: 1-2]
https://cloud.githubusercontent.com/assets/10756657/6056870/aa5d05c2-ad1f-11e4-84e9-29306001e846.png

/mnt/local still mounted

[image: 1-3]
https://cloud.githubusercontent.com/assets/10756657/6056887/ecbaf51e-ad1f-11e4-8e5e-41260541cd38.png

tried to recover via nfs share...everything good. recovered succesfully

thanks

—
Reply to this email directly or view it on GitHub
https://github.com/rear/rear/issues/543#issuecomment-73009723.

yunsr commented at 2015-02-05 08:58:

no errors
1-4

gdha commented at 2015-06-26 14:29:

@yunsr Hi - I've reviewed this case and NSR recover commands work with rear rescue image, right?
Therefore, NSR executables and libraries must be present in the rescue image as no errors were seen at that time. The recover via NSR through NSR is nothing more then a recover command of NSR, so I do not see many difference, except it broke somehow.
Is there a way to increase the verbosity within NSR so you could see more stuff in the NSR logs (not rear logs as rear is not responsible for the restore - except for making sure all NSR related bins are there).
Or is it too late to make some more tests?

yunsr commented at 2015-06-30 07:21:

Issue has been solved. It seems there were problems with incorrectly configuring name resolution, nsr is very sensitive to this. thanks for the help

[Export of Github issue for rear/rear.]