#1250 Issue closed: Can't login to recover ISO PPC64¶
Labels: support / question, fixed / solved / done
viper1986 opened issue at 2017-03-17 08:14:¶
Relax-and-Recover (rear) Issue Template¶
Please fill in the following items before submitting a new issue (quick response is not guaranteed with free support):
-
rear version (/usr/sbin/rear -V): Relax-and-Recover 2.00 / Git
-
OS version (cat /etc/rear/os.conf or lsb_release -a):
LSB Version: core-2.0-noarch:core-3.2-noarch:core-4.0-noarch:core-2.0-ppc64:core-3.2-ppc64:core-4.0-ppc64:desktop-4.0-noarch:desktop-4.0-ppc32:desktop-4.0-ppc64:graphics-2.0-noarch:graphics-2.0-ppc32:graphics-2.0-ppc64:graphics-3.2-noarch:graphics-3.2-ppc32:graphics-3.2-ppc64:graphics-4.0-noarch:graphics-4.0-ppc32:graphics-4.0-ppc64
Distributor ID: SUSE LINUX
Description: SUSE Linux Enterprise Server 11 (ppc64)
Release: 11
Codename: n/a -
rear configuration files (cat /etc/rear/site.conf or cat /etc/rear/local.conf):
cat /etc/rear/site.conf
BACKUP=NSR
OUTPUT=ISO
OUTPUT_URL=nfs://169.254.252.10/data/col1/rear
NSRSERVER=c301bcksrv
POOLNAME=ddos
RETENTION_TIME=Month
USE_CFG2HTML=y -
Are you using legacy BIOS or UEFI boot?
-
Brief description of the issue:
I create a bootable ISO image and try to boot, but I can't login to the root user. Enter root login but after couple sec promt to login display again.
Logs from booting:
Elapsed time since release of system processors: 577234 mins 30 secs
yaboot starting: loaded at 00040000 00067698 (0/0/00c3da70; sp: 069fffd0)
Config file '/etc/yaboot.conf' read, 247 bytes
Relax-and-Recover boot
Welcome to yaboot version r22.8.SuSE
booted from '/vdevice/v-scsi@30000008/disk@8100000000000000:\yaboot'
running with firmware 'IBM,FW840.00 (SV840_056)' on model 'IBM,8247-42L', serial 'IBM,03213B07A', partition 'ITE_iterelax01rest'
Enter "help" to get some basic usage information
boot: Relax-and-Recover
Please wait, loading kernel...
Allocated 01400000 bytes for kernel @ 072c0000
Elf64 kernel loaded...
Loading ramdisk...
ramdisk loaded 035a4169 @ 086c0000
OF stdout device is: /vdevice/vty@30000000
Preparing to boot Linux version 3.0.101-80-ppc64 (geeko@buildhost) (gcc version 4.3.4 [gcc-4_3-branch revision 152973] (SUSE Linux) ) #1 SMP Fri Jul 15 14:30:41 UTC 2016 (eb2ba81)
Max number of cores passed to firmware: 128 (NR_CPUS = 1024)
Calling ibm,client-architecture-support... done
command line: root=/dev/ram0 LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us console=hvc0 selinux=0
memory layout at init:
memory_limit : 0000000000000000 (16 MB aligned)
alloc_bottom : 000000000bc70000
alloc_top : 0000000010000000
alloc_top_hi : 0000000010000000
rmo_top : 0000000010000000
ram_top : 0000000010000000
instantiating rtas at 0x000000000dca0000... done
boot cpu hw idx 0
starting cpu hw idx 8... done
copying OF device tree...
Building dt strings...
Building dt structure...
Device tree strings 0x000000000bd80000 -> 0x000000000bd816eb
Device tree struct 0x000000000bd90000 -> 0x000000000bdc0000
Calling quiesce...
returning from prom_init
Using pSeries machine description
Using 1TB segments
Found initrd at 0xc0000000086c0000:0xc00000000bc64169
bootconsole [udbg0] enabled
Partition configured for 32 cpus.
CPU maps initialized for 8 threads per core
Starting Linux PPC64 #1 SMP Fri Jul 15 14:30:41 UTC 2016 (eb2ba81)
-----------------------------------------------------
ppc64_pft_size = 0x1a
physicalMemorySize = 0x80000000
htab_hash_mask = 0x7ffff
-----------------------------------------------------
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.0.101-80-ppc64 (geeko@buildhost) (gcc version 4.3.4 [gcc-4_3-branch revision 152973] (SUSE Linux) ) #1 SMP Fri Jul 15 14:30:41 UTC 2016 (eb2ba81)
[boot]0012 Setup Arch
EEH: No capable adapters found
PPC64 nvram contains 15360 bytes
Zone PFN ranges:
DMA 0x00000000 -> 0x00008000
Normal empty
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
2: 0x00000000 -> 0x00008000
Could not find start_pfn for node 0
[boot]0015 Setup Done
PERCPU: Embedded 1 pages/cpu @c000000001400000 s19072 r0 d46464 u65536
Built 2 zonelists in Node order, mobility grouping on. Total pages: 32740
Policy zone: DMA
Kernel command line: root=/dev/ram0 LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us console=hvc0 selinux=0
nmi ring buffer: 524288
PID hash table entries: 4096 (order: -1, 32768 bytes)
freeing bootmem node 2
Memory: 1989376k/2097152k available (14976k kernel code, 107776k reserved, 1856k data, 2552k bss, 5376k init)
Hierarchical RCU implementation.
CONFIG_RCU_FANOUT set to non-default value of 32
NR_IRQS:512 nr_irqs:512 16
clocksource: timebase mult[7d0000] shift[22] registered
Console: colour dummy device 80x25
console [hvc0] enabled, bootconsole disabled
console [hvc0] enabled, bootconsole disabled
allocated 1048576 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Dentry cache hash table entries: 262144 (order: 5, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 4, 1048576 bytes)
Mount-cache hash table entries: 4096
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
POWER8 performance monitor hardware support registered
Brought up 16 CPUs
devtmpfs: initialized
print_constraints: dummy:
NET: Registered protocol family 16
IBM eBus Device Driver
PCI: Probing PCI hardware
io_event_irq: No ibm,io-events on system! IO Event interrupt disabled.
bio: create slab at 0
vgaarb: loaded
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource timebase
AppArmor: AppArmor Filesystem Enabled
NET: Registered protocol family 2
IP route cache hash table entries: 16384 (order: 1, 131072 bytes)
TCP established hash table entries: 65536 (order: 4, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 4, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 0, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 0, 65536 bytes)
NET: Registered protocol family 1
Unpacking initramfs...
Freeing initrd memory: 54976k freed
IOMMU table initialized, virtual merging enabled
futex hash table entries: 8192 (order: 4, 1048576 bytes)
audit: initializing netlink socket (disabled)
type=2000 audit(1489735363.210:1): initialized
bounce pool size: 64 pages
HugeTLB registered 16 MB page size, pre-allocated 0 pages
HugeTLB registered 16 GB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 8192 (order 0, 65536 bytes)
msgmni has been set to 998
alg: No test for stdrng (krng)
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
rpaphp: RPA HOT Plug PCI Controller Driver version: 0.1
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
pmac_zilog: 0.6 (Benjamin Herrenschmidt )
Generic RTC Driver v1.07
Registering IBM pSeries RNG driver
Uniform Multi-Platform E-IDE driver
Fixed MDIO Bus: probed
mousedev: PS/2 mouse device common for all mice
EDAC MC: Ver: 2.1.0
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 15
Registering the dns_resolver key type
registered taskstats version 1
Freeing unused kernel memory: 5376k freed
INIT: version 2.86 booting
INIT: cannot execute "/etc/scripts/boot"
INIT: cannot execute "/etc/scripts/system-setup"
INIT: Entering runlevel: 3
INIT: cannot execute "/etc/scripts/run-syslog"
INIT: cannot execute "/etc/scripts/run-syslog"
INIT: cannot execute "/etc/scripts/run-syslog"
INIT: cannot execute "/etc/scripts/run-syslog"
INIT: cannot execute "/etc/scripts/run-syslog"
INIT: cannot execute "/etc/scripts/run-syslog"
INIT: cannot execute "/etc/scripts/run-syslog"
INIT: cannot execute "/etc/scripts/run-syslog"
INIT: cannot execute "/etc/scripts/run-syslog"
INIT: cannot execute "/etc/scripts/run-syslog"
INIT: Id "sy" respawning too fast: disabled for 5 minutes
Relax-and-Recover 2.00 / Git
Relax-and-Recover comes with ABSOLUTELY NO WARRANTY; for details see
the GNU General Public License at: http://www.gnu.org/licenses/gpl.html
Host iterelax01 using Backup NSR and Output ISO
Build date: Wed, 15 Mar 2017 09:23:05 +0100
Welcome to SLES for SAP Applications 11.4 (ppc64) - Kernel 3.0.101-80-ppc64 (hvc0).
(none) login: root
Relax-and-Recover 2.00 / Git
Relax-and-Recover comes with ABSOLUTELY NO WARRANTY; for details see
the GNU General Public License at: http://www.gnu.org/licenses/gpl.html
Host iterelax01 using Backup NSR and Output ISO
Build date: Wed, 15 Mar 2017 09:23:05 +0100
Welcome to SLES for SAP Applications 11.4 (ppc64) - Kernel 3.0.101-80-ppc64 (hvc0).
(none) login:
Logs from creating ISO and backup:
cat /var/log/rear/rear-iterelax01.log
2017-03-15 09:23:43 Relax-and-Recover 2.00 / Git
2017-03-15 09:23:43 Command line options: /usr/sbin/rear dump
2017-03-15 09:23:43 Using log file: /var/log/rear/rear-iterelax01.log.lockless
2017-03-15 09:23:44 Including conf/Linux-ppc64.conf
2017-03-15 09:23:44 Including conf/GNU/Linux.conf
2017-03-15 09:23:44 Including conf/SUSE_LINUX.conf
2017-03-15 09:23:44 Including /etc/rear/site.conf
2017-03-15 09:23:44 Including /etc/rear/local.conf
2017-03-15 09:23:44 Running 'init' stage
2017-03-15 09:23:44 Including init/default/010_set_drlm_env.sh
2017-03-15 09:23:44 Including init/default/030_update_recovery_system.sh
2017-03-15 09:23:44 Including init/default/050_check_rear_recover_mode.sh
2017-03-15 09:23:44 Finished running 'init' stage in 0 seconds
2017-03-15 09:23:44 Using build area '/tmp/rear.qIADdqRGPBBCisI'
mkdir: created directory `/tmp/rear.qIADdqRGPBBCisI/rootfs'
mkdir: created directory `/tmp/rear.qIADdqRGPBBCisI/tmp'
2017-03-15 09:23:44 Running dump workflow
2017-03-15 09:23:44 Dumping out configuration and system information
2017-03-15 09:23:44 System definition:
2017-03-15 09:23:44 ARCH = Linux-ppc64
2017-03-15 09:23:44 OS = GNU/Linux
2017-03-15 09:23:44 OS_MASTER_VENDOR =
2017-03-15 09:23:44 OS_MASTER_VERSION = 11
2017-03-15 09:23:44 OS_MASTER_VENDOR_ARCH = ppc64
2017-03-15 09:23:44 OS_MASTER_VENDOR_VERSION = 11
2017-03-15 09:23:44 OS_MASTER_VENDOR_VERSION_ARCH = 11/ppc64
2017-03-15 09:23:44 OS_VENDOR = SUSE_LINUX
2017-03-15 09:23:44 OS_VERSION = 11
2017-03-15 09:23:44 OS_VENDOR_ARCH = SUSE_LINUX/ppc64
2017-03-15 09:23:44 OS_VENDOR_VERSION = SUSE_LINUX/11
2017-03-15 09:23:44 OS_VENDOR_VERSION_ARCH = SUSE_LINUX/11/ppc64
2017-03-15 09:23:44 Configuration tree:
2017-03-15 09:23:44 Linux-ppc64.conf : OK
2017-03-15 09:23:44 GNU/Linux.conf : OK
2017-03-15 09:23:44 ppc64.conf : missing/empty
2017-03-15 09:23:44 11.conf : missing/empty
2017-03-15 09:23:44 11/ppc64.conf : missing/empty
2017-03-15 09:23:44 SUSE_LINUX.conf : OK
2017-03-15 09:23:44 SUSE_LINUX/ppc64.conf : missing/empty
2017-03-15 09:23:44 SUSE_LINUX/11.conf : missing/empty
2017-03-15 09:23:44 SUSE_LINUX/11/ppc64.conf : missing/empty
2017-03-15 09:23:44 site.conf : OK
2017-03-15 09:23:44 local.conf : OK
2017-03-15 09:23:44 Backup with NSR
2017-03-15 09:23:44 NSR_CATCH_CHILD_STDOUT = ON
2017-03-15 09:23:44 NSR_DEFAULT_POOL_NAME = Default
2017-03-15 09:23:44 NSR_JOB_PARENT_JOBID = 876540
2017-03-15 09:23:44 NSR_JOB_TYPE_VALUE = pre job
2017-03-15 09:23:44 NSR_MAST = nsrexecd
2017-03-15 09:23:44 NSR_RETENTION_TIME =
2017-03-15 09:23:44 NSR_ROOT_DIR = /nsr
2017-03-15 09:23:44 NSR_SHUTDOWN_STDIO = 1
2017-03-15 09:23:44 NSR_STD_MSG_FD = 21:22:23
2017-03-15 09:23:44 BACKUP_INTEGRITY_CHECK =
2017-03-15 09:23:44 BACKUP_MOUNTCMD =
2017-03-15 09:23:44 BACKUP_ONLY_EXCLUDE = no
2017-03-15 09:23:44 BACKUP_ONLY_INCLUDE = no
2017-03-15 09:23:44 BACKUP_OPTIONS =
2017-03-15 09:23:44 BACKUP_RESTORE_MOVE_AWAY_DIRECTORY = /var/lib/rear/moved_away_after_backup_restore/
2017-03-15 09:23:44 BACKUP_RESTORE_MOVE_AWAY_FILES =
2017-03-15 09:23:44 BACKUP_RSYNC_OPTIONS = --sparse --archive --hard-links --numeric-ids --stats
2017-03-15 09:23:44 BACKUP_SELINUX_DISABLE = 1
2017-03-15 09:23:44 BACKUP_TYPE =
2017-03-15 09:23:44 BACKUP_UMOUNTCMD =
2017-03-15 09:23:44 BACKUP_URL =
2017-03-15 09:23:44 Output to ISO
2017-03-15 09:23:44 ISO_DEFAULT = boothd
2017-03-15 09:23:44 ISO_DIR = /var/lib/rear/output
2017-03-15 09:23:44 ISO_FILES =
2017-03-15 09:23:44 ISO_ISOLINUX_BIN =
2017-03-15 09:23:44 ISO_MAX_SIZE =
2017-03-15 09:23:44 ISO_MKISOFS_BIN = /usr/bin/mkisofs
2017-03-15 09:23:44 ISO_PREFIX = rear-iterelax01
2017-03-15 09:23:44 ISO_VOLID = RELAXRECOVER
2017-03-15 09:23:44 RESULT_MAILTO =
2017-03-15 09:23:44 Your system is not yet validated. Please carefully check all functions
2017-03-15 09:23:44 and create a validation record with 'rear validate'. This will help others
2017-03-15 09:23:44 to know about the validation status of Relax-and-Recover on this system.
2017-03-15 09:23:44 Finished running dump workflow
2017-03-15 09:23:44 Saving /var/log/rear/rear-iterelax01.log.lockless as /var/log/rear/rear-iterelax01.log
2017-03-15 09:23:47 Including rescue/GNU/Linux/960_collect_MC_serviceguard_infos.sh
2017-03-15 09:23:47 Including rescue/GNU/Linux/990_sysreqs.sh
2017-03-15 09:24:47 Finished running 'rescue' stage in 98 seconds
2017-03-15 09:24:47 Running 'build' stage
2017-03-15 09:24:47 Including build/GNU/Linux/005_create_symlinks.sh
2017-03-15 09:24:47 Creating LVM binary symlinks
2017-03-15 09:24:47 Including build/GNU/Linux/090_create_lib_directories_and_symlinks.sh
2017-03-15 09:24:47 Mirroring lib/ structure.
2017-03-15 09:24:47 Including build/GNU/Linux/100_copy_as_is.sh
2017-03-15 09:24:47 Copying files and directories
2017-03-15 09:24:47 Files being copied: /usr/share/rear /var/lib/rear /usr/lib/yaboot/yaboot /usr/lib/yaboot/ofboot /usr/lib/yaboot/yaboot.debug /usr/lib/yaboot/addnote /dev /etc/inputrc /etc/protocols /etc/services /etc/rpc /etc/termcap /etc/terminfo /usr/share/terminfo /etc/netconfig /etc/mke2fs.conf /etc/SuSE-release /etc/lsb-release /etc/os-release /lib/firmware /etc/localtime /etc/magic /usr/share/misc/magic /etc/dracut.conf /etc/dracut.conf.d /usr/lib/dracut /sbin/modprobe.ksplice-orig /etc/sysctl.conf /etc/sysctl.d /etc/e2fsck.conf /etc/sysconfig/network/config /etc/sysconfig/network/scripts/functions /etc/localtime /etc/lvm /etc/default/grub /nsr /opt/nsr /usr/lib/nsr /usr/lib64/gconv /usr/share/cracklib/cracklib.magic /usr/share/cracklib/pw_dict.hwm /usr/share/cracklib/pw_dict.pwd /usr/share/cracklib/pw_dict.pwi /etc/security/pwquality.conf /etc/multipath.conf /etc/multipath/bindings /etc/multipath/wwids /lib64/multipath /lib/modules/3.0.101-80-ppc64/modules.alias /lib/modules/3.0.101-80-ppc64/modules.alias.bin /lib/modules/3.0.101-80-ppc64/modules.builtin /lib/modules/3.0.101-80-ppc64/modules.builtin.bin /lib/modules/3.0.101-80-ppc64/modules.ccwmap /lib/modules/3.0.101-80-ppc64/modules.dep /lib/modules/3.0.101-80-ppc64/modules.dep.bin /lib/modules/3.0.101-80-ppc64/modules.ieee1394map /lib/modules/3.0.101-80-ppc64/modules.inputmap /lib/modules/3.0.101-80-ppc64/modules.isapnpmap /lib/modules/3.0.101-80-ppc64/modules.ofmap /lib/modules/3.0.101-80-ppc64/modules.order /lib/modules/3.0.101-80-ppc64/modules.pcimap /lib/modules/3.0.101-80-ppc64/modules.seriomap /lib/modules/3.0.101-80-ppc64/modules.symbols /lib/modules/3.0.101-80-ppc64/modules.symbols.bin /lib/modules/3.0.101-80-ppc64/modules.usbmap /etc/modprobe.conf /etc/modprobe.conf.YaST2save /etc/modprobe.conf.local /etc/modprobe.d /etc/udev /etc/sysconfig/udev /lib/udev /usr/lib/udev /etc/resolv.conf /etc/hosts /etc/host.conf /etc/iproute2 /usr/share/kbd/keymaps/i386/qwerty/defkeymap.map.gz /etc/ssh /etc/ssh_banner /root/.ssh /etc/ld.so.conf /etc/ld.so.conf.d/ghostscript-omni.conf /etc/ld.so.conf.d/graphviz.conf /etc/ld.so.conf.d/networker.conf
2017-03-15 09:24:47 Files being excluded: dev/shm dev/oracleasm dev/.udev /var/lib/rear/output/rear-iterelax01.iso /lib/firmware dev/shm/* /nsr/logs/* /nsr/debug/* /nsr/index/* /nsr/lockbox/* /nsr/mm/* /nsr/repository/* /nsr/scripts/* /nsr/utils/*
tar: Removing leading `/' from member names
tar: Removing leading `/' from hard link targets
2017-03-15 09:24:48 Finished copying COPY_AS_IS
2017-03-15 09:24:49 Checking COPY_AS_IS_EXELIST
2017-03-15 09:24:50 Adding required /lib/ld-2.11.3.so to LIBS
2017-03-15 09:24:50 Adding required /lib/ld.so.1 to LIBS
2017-03-15 09:24:50 Adding required /lib/libdl-2.11.3.so to LIBS
2017-03-15 09:24:50 Adding required /lib/libdl.so.2 to LIBS
2017-03-15 09:24:50 Adding required /lib/power8/../power7/libc-2.11.3.so to LIBS
2017-03-15 09:24:50 Adding required /lib/power8/libc-2.11.3.so to LIBS
2017-03-15 09:24:50 Adding required /lib/power8/libc.so.6 to LIBS
2017-03-15 09:24:50 Adding required /lib64/ld-2.11.3.so to LIBS
2017-03-15 09:24:50 Adding required /lib64/ld64.so.1 to LIBS
2017-03-15 09:24:50 Adding required /lib64/libaio.so.1 to LIBS
2017-03-15 09:24:50 Adding required /lib64/libaio.so.1.0.1 to LIBS
2017-03-15 09:24:50 Adding required /lib64/libdl-2.11.3.so to LIBS
2017-03-15 09:24:50 Adding required /lib64/libdl.so.2 to LIBS
2017-03-15 09:24:50 Adding required /lib64/libselinux.so.1 to LIBS
2017-03-15 09:24:50 Adding required /lib64/power8/../power7/libc-2.11.3.so to LIBS
2017-03-15 09:24:50 Adding required /lib64/power8/libc-2.11.3.so to LIBS
2017-03-15 09:24:50 Adding required /lib64/power8/libc.so.6 to LIBS
2017-03-15 09:24:50 Adding required /usr/lib64/libusb-0.1.so.4 to LIBS
2017-03-15 09:24:50 Adding required /usr/lib64/libusb-0.1.so.4.4.4 to LIBS
2017-03-15 09:24:50 Including build/GNU/Linux/110_touch_empty_files.sh
2017-03-15 09:24:50 Including build/GNU/Linux/130_create_dotfiles.sh
2017-03-15 09:24:50 Including build/GNU/Linux/150_adjust_permissions.sh
2017-03-15 09:24:50 Including build/GNU/Linux/390_copy_binaries_libraries.sh
2017-03-15 09:24:50 Copying binaries and libraries
2017-03-15 09:24:50 Binaries being copied: /bin/awk /bin/basename /bin/bash /bin/cat /bin/chmod /bin/chown /bin/cp /bin/cpio /bin/date /bin/dd /bin/df /bin/dmesg /bin/dumpkeys /bin/echo /bin/egrep /bin/false /bin/fgrep /bin/findmnt /bin/grep /bin/gzip /bin/hostname /bin/kbd_mode /bin/ln /bin/loadkeys /bin/logger /bin/ls /bin/md5sum /bin/mkdir /bin/mknod /bin/mktemp /bin/mount /bin/mv /bin/netstat /bin/openvt /bin/ping /bin/ps /bin/pwd /bin/readlink /bin/rm /bin/rmdir /bin/sed /bin/sleep /bin/sort /bin/stat /bin/stty /bin/sync /bin/tar /bin/touch /bin/true /bin/umount /bin/uname /bin/usleep /bin/vi /lib/udev/ata_id /lib/udev/cdrom_id /lib/udev/edd_id /lib/udev/path_id /lib/udev/scsi_id /lib/udev/usb_id /sbin/agetty /sbin/arping /sbin/blkid /sbin/cfdisk /sbin/cryptsetup /sbin/dhcpcd /sbin/dmeventd /sbin/dmsetup /sbin/dosfslabel /sbin/ethtool /sbin/fdisk /sbin/fsadm /sbin/fsck /sbin/fsck.ext2 /sbin/fsck.ext3 /sbin/fsck.ext4 /sbin/fsck.reiserfs /sbin/fsck.xfs /sbin/halt /sbin/ifconfig /sbin/ifenslave /sbin/init /sbin/insmod /sbin/ip /sbin/killall5 /sbin/klogd /sbin/kpartx /sbin/ldconfig /sbin/lsmod /sbin/lspci /sbin/lvm /sbin/mingetty /sbin/mkfs /sbin/mkfs.ext2 /sbin/mkfs.ext3 /sbin/mkfs.ext4 /sbin/mkfs.reiserfs /sbin/mkfs.vfat /sbin/mkfs.xfs /sbin/mkofboot /sbin/mkreiserfs /sbin/mkswap /sbin/modprobe /sbin/multipath /sbin/multipathd /sbin/nameif /sbin/ofpath /sbin/pidof /sbin/poweroff /sbin/reboot /sbin/reiserfsck /sbin/reiserfstune /sbin/rmmod /sbin/route /sbin/rpcbind /sbin/rpcinfo /sbin/sfdisk /sbin/shutdown /sbin/swapoff /sbin/swapon /sbin/sysctl /sbin/syslog-ng /sbin/telinit /sbin/tune2fs /sbin/udevadm /sbin/udevd /sbin/wipefs /sbin/yabootconfig /sbin/ybin /usr/bin/attr /usr/bin/bc /usr/bin/chacl /usr/bin/chroot /usr/bin/cmp /usr/bin/cut /usr/bin/diff /usr/bin/dirname /usr/bin/du /usr/bin/env /usr/bin/expand /usr/bin/expr /usr/bin/file /usr/bin/find /usr/bin/fmt /usr/bin/free /usr/bin/getent /usr/bin/getfacl /usr/bin/getfattr /usr/bin/getopt /usr/bin/head /usr/bin/id /usr/bin/joe /usr/bin/join /usr/bin/killall /usr/bin/ldd /usr/bin/less /usr/bin/lsscsi /usr/bin/mkfifo /usr/bin/netcat /usr/bin/nslookup /usr/bin/nsrports /usr/bin/nsrwatch /usr/bin/rsync /usr/bin/scp /usr/bin/seq /usr/bin/setfacl /usr/bin/setfattr /usr/bin/sftp /usr/bin/sg_inq /usr/bin/ssh /usr/bin/strace /usr/bin/strings /usr/bin/tac /usr/bin/tail /usr/bin/tee /usr/bin/test /usr/bin/top /usr/bin/tr /usr/bin/tty /usr/bin/uniq /usr/bin/w /usr/bin/wc /usr/bin/which /usr/bin/xargs /usr/lib64/ssh/sftp-server /usr/sbin/bootlist /usr/sbin/ifrename /usr/sbin/iptraf /usr/sbin/mminfo /usr/sbin/nsrexec /usr/sbin/nsrexecd /usr/sbin/nsrfsra /usr/sbin/nsrinfo /usr/sbin/nsrretrieve /usr/sbin/nvram /usr/sbin/ofpathname /usr/sbin/parted /usr/sbin/partprobe /usr/sbin/pseries_platform /usr/sbin/rear /usr/sbin/recover /usr/sbin/rpc.statd /usr/sbin/save /usr/sbin/savefs /usr/sbin/savepnpc /usr/sbin/sshd /usr/sbin/traceroute /usr/sbin/uasm /usr/sbin/xfs_admin /usr/sbin/xfs_db
2017-03-15 09:24:52 Libraries being copied: /lib/ld-2.11.3.so /lib/ld.so.1 /lib/libaio.so.1 /lib/libaio.so.1.0.1 /lib/libaudit.so.0 /lib/libaudit.so.0.0.0 /lib/libdl-2.11.3.so /lib/libdl.so.2 /lib/libgcc_s.so.1 /lib/libncursesw.so.5 /lib/libncursesw.so.5.6 /lib/libnss_dns-2.11.3.so /lib/libnss_dns.so.2 /lib/libnss_files-2.11.3.so /lib/libnss_files.so.2 /lib/libpam.so.0 /lib/libpam.so.0.83.1 /lib/libresolv-2.11.3.so /lib/libresolv.so.2 /lib/power8/../power7/libc-2.11.3.so /lib/power8/../power7/libpthread-2.11.3.so /lib/power8/../power7/librt-2.11.3.so /lib/power8/libc-2.11.3.so /lib/power8/libc.so.6 /lib/power8/libpthread-2.11.3.so /lib/power8/libpthread.so.0 /lib/power8/librt-2.11.3.so /lib/power8/librt.so.1 /lib64/ld-2.11.3.so /lib64/ld64.so.1 /lib64/libacl.so.1 /lib64/libacl.so.1.1.0 /lib64/libaio.so.1 /lib64/libaio.so.1.0.1 /lib64/libattr.so.1 /lib64/libattr.so.1.1.0 /lib64/libaudit.so.0 /lib64/libaudit.so.0.0.0 /lib64/libblkid.so.1 /lib64/libblkid.so.1.1.0 /lib64/libcap.so.2 /lib64/libcap.so.2.11 /lib64/libcom_err.so.2 /lib64/libcom_err.so.2.1 /lib64/libcrypt-2.11.3.so /lib64/libcrypt.so.1 /lib64/libcryptsetup.so.1 /lib64/libcryptsetup.so.1.0.0 /lib64/libdevmapper-event.so.1.02 /lib64/libdevmapper.so.1.02 /lib64/libdevmapper.so.1.03 /lib64/libdl-2.11.3.so /lib64/libdl.so.2 /lib64/libe2p.so.2 /lib64/libe2p.so.2.3 /lib64/libext2fs.so.2 /lib64/libext2fs.so.2.4 /lib64/libgcc_s.so.1 /lib64/libgcrypt.so.11 /lib64/libgcrypt.so.11.7.0 /lib64/libgpg-error.so.0 /lib64/libgpg-error.so.0.8.0 /lib64/libgssglue.so.1 /lib64/libgssglue.so.1.0.0 /lib64/libkeyutils-1.2.so /lib64/libkeyutils.so.1 /lib64/libmount.so.1 /lib64/libmount.so.1.1.0 /lib64/libmpathpersist.so.0 /lib64/libmultipath.so.0 /lib64/libncurses.so.5 /lib64/libncurses.so.5.6 /lib64/libncursesw.so.5 /lib64/libncursesw.so.5.6 /lib64/libnet.so.0 /lib64/libnet.so.0.0.0 /lib64/libnsl-2.11.3.so /lib64/libnsl.so.1 /lib64/libnss_dns-2.11.3.so /lib64/libnss_dns.so.2 /lib64/libnss_files-2.11.3.so /lib64/libnss_files.so.2 /lib64/libpam.so.0 /lib64/libpam.so.0.83.1 /lib64/libpci.so.3 /lib64/libpci.so.3.1.7 /lib64/libpopt.so.0 /lib64/libpopt.so.0.0.0 /lib64/libreadline.so.5 /lib64/libreadline.so.5.2 /lib64/libresolv-2.11.3.so /lib64/libresolv.so.2 /lib64/libselinux.so.1 /lib64/libsepol.so.1 /lib64/libsysfs.so.2 /lib64/libsysfs.so.2.0.1 /lib64/libtirpc.so.1 /lib64/libtirpc.so.1.0.10 /lib64/libudev.so.0 /lib64/libudev.so.0.5.1 /lib64/libutil-2.11.3.so /lib64/libutil.so.1 /lib64/libuuid.so.1 /lib64/libuuid.so.1.3.0 /lib64/libwrap.so.0 /lib64/libwrap.so.0.7.6 /lib64/libz.so.1 /lib64/libz.so.1.2.7 /lib64/power8/../power7/libc-2.11.3.so /lib64/power8/../power7/libm-2.11.3.so /lib64/power8/../power7/libpthread-2.11.3.so /lib64/power8/../power7/librt-2.11.3.so /lib64/power8/libc-2.11.3.so /lib64/power8/libc.so.6 /lib64/power8/libm-2.11.3.so /lib64/power8/libm.so.6 /lib64/power8/libpthread-2.11.3.so /lib64/power8/libpthread.so.0 /lib64/power8/librt-2.11.3.so /lib64/power8/librt.so.1 /usr/lib/nsr/libcrypto.so.0.9.7 /usr/lib/nsr/libssl.so.0.9.7 /usr/lib64/libbfd-2.24.0.20140403-3.so /usr/lib64/libbind9.so.90 /usr/lib64/libbind9.so.90.0.11 /usr/lib64/libcrypto.so.0.9.8 /usr/lib64/libdal-0.3.so.0 /usr/lib64/libdal-0.3.so.0.0.0 /usr/lib64/libdns.so.104 /usr/lib64/libdns.so.104.1.0 /usr/lib64/libgssapi_krb5.so.2 /usr/lib64/libgssapi_krb5.so.2.2 /usr/lib64/libisc.so.95 /usr/lib64/libisc.so.95.8.0 /usr/lib64/libisccc.so.90 /usr/lib64/libisccc.so.90.0.6 /usr/lib64/libisccfg.so.90 /usr/lib64/libisccfg.so.90.2.3 /usr/lib64/libiw.so.30 /usr/lib64/libk5crypto.so.3 /usr/lib64/libk5crypto.so.3.1 /usr/lib64/libkrb5.so.3 /usr/lib64/libkrb5.so.3.3 /usr/lib64/libkrb5support.so.0 /usr/lib64/libkrb5support.so.0.1 /usr/lib64/liblwres.so.91 /usr/lib64/liblwres.so.91.0.0 /usr/lib64/libmagic.so.1 /usr/lib64/libmagic.so.1.0.0 /usr/lib64/libpanelw.so.5 /usr/lib64/libpanelw.so.5.6 /usr/lib64/libparted.so.0 /usr/lib64/libparted.so.0.0.1 /usr/lib64/libreiserfs-0.3.so.0 /usr/lib64/libreiserfs-0.3.so.0.0.0 /usr/lib64/libsgutils2.so.2 /usr/lib64/libsgutils2.so.2.0.0 /usr/lib64/libslp.so.1 /usr/lib64/libslp.so.1.0.0 /usr/lib64/libusb-0.1.so.4 /usr/lib64/libusb-0.1.so.4.4.4 /usr/lib64/libxml2.so.2 /usr/lib64/libxml2.so.2.7.6
2017-03-15 09:24:52 Including build/GNU/Linux/400_copy_modules.sh
2017-03-15 09:24:52 Collecting modules for kernel version 3.0.101-80-ppc64
2017-03-15 09:24:53 Copying kernel modules
2017-03-15 09:24:55 Including build/GNU/Linux/450_symlink_mingetty.sh
2017-03-15 09:24:55 Including build/default/500_patch_sshd_config.sh
2017-03-15 09:24:55 Including build/NSR/default/550_add_nsr_libs_to_ldsoconf.sh
2017-03-15 09:24:55 Add NSR library paths to etc/ld.so.conf
2017-03-15 09:24:55 Including build/GNU/Linux/600_verify_and_adjust_udev.sh
2017-03-15 09:24:55 Checking udev
2017-03-15 09:24:55 Including build/SUSE_LINUX/610_link_systemd_lib.sh
ln: failed to create symbolic link `/tmp/rear.VZ0sSt5OmzzRCw2/rootfs/lib/systemd/system': No such file or directory
2017-03-15 09:24:55 Including build/GNU/Linux/610_verify_and_adjust_udev_systemd.sh
2017-03-15 09:24:55 Cleaning up systemd udev socket files
2017-03-15 09:24:55 Including build/GNU/Linux/620_verify_os_release_file.sh
2017-03-15 09:24:55 Including build/GNU/Linux/630_simplify_systemd_reboot_halt_poweroff_shutdown.sh
2017-03-15 09:24:55 Including build/GNU/Linux/630_verify_resolv_conf_file.sh
2017-03-15 09:24:55 Including build/default/960_remove_encryption_keys.sh
2017-03-15 09:24:55 Including build/default/970_add_rear_release.sh
2017-03-15 09:24:55 Including build/default/980_verify_rootfs.sh
2017-03-15 09:24:55 Including build/default/990_update_os_conf.sh
2017-03-15 09:24:55 Finished running 'build' stage in 8 seconds
2017-03-15 09:24:55 Running 'pack' stage
2017-03-15 09:24:55 Including pack/Linux-ppc64/300_copy_kernel.sh
2017-03-15 09:24:55 Found kernel /boot/vmlinux-3.0.101-80-ppc64
2017-03-15 09:24:55 Including pack/GNU/Linux/900_create_initramfs.sh
2017-03-15 09:24:55 Creating recovery/rescue system initramfs/initrd initrd.cgz with gzip default compression
2017-03-15 09:25:08 Created initrd.cgz with gzip default compression (56246633 bytes) in 13 seconds
2017-03-15 09:25:08 Finished running 'pack' stage in 13 seconds
2017-03-15 09:25:08 Running 'output' stage
2017-03-15 09:25:08 Including output/default/010_set_umask.sh
2017-03-15 09:25:08 Setting umask to 077
2017-03-15 09:25:08 Including output/default/100_mount_output_path.sh
2017-03-15 09:25:08 Mounting with 'mount -t nfs -o rw,noatime 169.254.252.10:/data/col1/rear /tmp/rear.VZ0sSt5OmzzRCw2/outputfs'
2017-03-15 09:25:13 Including output/default/150_save_copy_of_prefix_dir.sh
2017-03-15 09:25:13 Including output/default/200_make_boot_dir.sh
2017-03-15 09:25:13 Including output/default/200_make_prefix_dir.sh
2017-03-15 09:25:13 Including output/default/250_create_lock.sh
2017-03-15 09:25:14 Including output/ISO/Linux-ppc64/300_create_yaboot.sh
2017-03-15 09:25:14 Including output/ISO/Linux-ppc64/310_create_grub2.sh
2017-03-15 09:25:14 Including output/default/400_copy_disk_struct_files.sh
/usr/share/rear/output/default/400_copy_disk_struct_files.sh: line 1: ../../backup/BLOCKCLONE/default/400_copy_disk_struct_files.sh: No such file or directory
2017-03-15 09:25:14 Including output/ISO/Linux-ppc64/800_create_isofs.sh
2017-03-15 09:25:14 Copying kernel
2017-03-15 09:25:14 Starting '/usr/bin/mkisofs'
2017-03-15 09:25:14 Making ISO image
Warning: creating filesystem that does not conform to ISO-9660.
genisoimage 1.1.8 (Linux)
Scanning etc
Scanning ppc
Scanning ppc/chrp
Creating 1 PReP boot partition(s)
CHRP boot partition 1
Writing: HFS volume header Start Block 0
Done with: HFS volume header Block(s) 4
Writing: Initial Padblock Start Block 4
Done with: Initial Padblock Block(s) 12
Writing: Primary Volume Descriptor Start Block 16
Done with: Primary Volume Descriptor Block(s) 1
Writing: Joliet Volume Descriptor Start Block 17
Done with: Joliet Volume Descriptor Block(s) 1
Writing: End Volume Descriptor Start Block 18
Done with: End Volume Descriptor Block(s) 1
Writing: Version block Start Block 19
Done with: Version block Block(s) 1
Writing: Path table Start Block 20
Done with: Path table Block(s) 4
Writing: Joliet path table Start Block 24
Done with: Joliet path table Block(s) 4
Writing: Directory tree Start Block 28
Done with: Directory tree Block(s) 4
Writing: Joliet directory tree Start Block 32
Done with: Joliet directory tree Block(s) 4
Writing: Directory tree cleanup Start Block 36
Done with: Directory tree cleanup Block(s) 0
Writing: Extension record Start Block 36
Done with: Extension record Block(s) 1
Writing: The File(s) Start Block 37
13.17% done, estimate finish Wed Mar 15 09:25:14 2017
26.29% done, estimate finish Wed Mar 15 09:25:14 2017
39.45% done, estimate finish Wed Mar 15 09:25:14 2017
52.57% done, estimate finish Wed Mar 15 09:25:14 2017
65.73% done, estimate finish Wed Mar 15 09:25:14 2017
78.88% done, estimate finish Wed Mar 15 09:25:14 2017
92.00% done, estimate finish Wed Mar 15 09:25:14 2017
Total translation table size: 0
Total rockridge attributes bytes: 1202
Total directory bytes: 6144
Path table size(bytes): 46
Done with: The File(s) Block(s) 37865
Writing: Ending Padblock Start Block 37902
Done with: Ending Padblock Block(s) 150
Max brk space used 0
38052 extents written (74 MB)
2017-03-15 09:25:14 Including output/default/940_grub2_rescue.sh
2017-03-15 09:25:14 Including output/default/940_grub_rescue.sh
2017-03-15 09:25:14 Including output/default/950_copy_result_files.sh
2017-03-15 09:25:14 Copying resulting files to nfs location
2017-03-15 09:25:14 Saving /var/log/rear/rear-iterelax01.log as rear-iterelax01.log to nfs location
2017-03-15 09:25:14 Copying result files '/var/lib/rear/recovery/cfg2html/iterelax01.html /var/lib/rear/output/rear-iterelax01.iso /tmp/rear.VZ0sSt5OmzzRCw2/tmp/VERSION /tmp/rear.VZ0sSt5OmzzRCw2/tmp/README /tmp/rear.VZ0sSt5OmzzRCw2/tmp/rear-iterelax01.log' to /tmp/rear.VZ0sSt5OmzzRCw2/outputfs/iterelax01 at nfs location
2017-03-15 09:25:15 Including output/default/950_email_result_files.sh
2017-03-15 09:25:15 Including output/NSR/default/950_nsr_save_result_files.sh
2017-03-15 09:25:15 Saving result files with NSR (EMC NetWorker)
2017-03-15 09:25:15 Saving files '/var/lib/rear/recovery/cfg2html/iterelax01.html /var/lib/rear/output/rear-iterelax01.iso /tmp/rear.VZ0sSt5OmzzRCw2/tmp/VERSION /tmp/rear.VZ0sSt5OmzzRCw2/tmp/README /tmp/rear.VZ0sSt5OmzzRCw2/tmp/rear-iterelax01.log' with save
80319:save: Aborting session channel connection (1) to ; why = Broken pipe
89987:save: Cannot determine the job ID: Broken pipe. Continuing ...
103062:save: Loading the library at 'libDDBoost.so' failed ([2] libDDBoost.so: cannot open shared object file: No such file or directory).
Refer to the product release notes to ensure Data Domain devices are supported on this platform.
/var/lib/rear/recovery/cfg2html/iterelax01.html
/var/lib/rear/output/rear-iterelax01.iso
/tmp/rear.VZ0sSt5OmzzRCw2/tmp/VERSION
/tmp/rear.VZ0sSt5OmzzRCw2/tmp/README
/tmp/rear.VZ0sSt5OmzzRCw2/tmp/rear-iterelax01.log
/var/lib/rear/recovery/cfg2html/
/var/lib/rear/recovery/
/var/lib/rear/output/
/tmp/rear.VZ0sSt5OmzzRCw2/tmp/
/tmp/rear.VZ0sSt5OmzzRCw2/
/var/lib/rear/
/var/lib/
/var/
/tmp/
/
save: REAR.20170315 79 MB 00:00:22 15 files
94694:save: The backup of save set 'REAR.20170315' succeeded.
2017-03-15 09:25:37 If the NSR_RETENTION_TIME="1 day" is too low please add NSR_RETENTION_TIME variable in /etc/rear/local.conf
2017-03-15 09:25:37 pool retent name
2017-03-15 09:25:37 ============================
2017-03-15 09:25:37 pool retent name
Default 03/16/17 REAR.20170315
Default 03/16/17 REAR.20170315
Default 03/16/17 REAR.20170315
Default 03/16/17 REAR.20170315
2017-03-15 09:25:37 Including output/default/970_remove_lock.sh
2017-03-15 09:25:37 Including output/default/980_umount_output_dir.sh
2017-03-15 09:25:37 Unmounting '/tmp/rear.VZ0sSt5OmzzRCw2/outputfs'
2017-03-15 09:25:38 Finished running 'output' stage in 30 seconds
2017-03-15 09:25:38 Running 'backup' stage
2017-03-15 09:25:38 Including backup/default/005_valid_backup_methods.sh
2017-03-15 09:25:38 Including backup/default/010_pre_backup_script.sh
2017-03-15 09:25:38 Including backup/default/990_post_backup_script.sh
2017-03-15 09:25:38 Finished running 'backup' stage in 0 seconds
2017-03-15 09:25:38 Finished running mkbackup workflow
2017-03-15 09:25:38 Running exit tasks.
2017-03-15 09:25:38 Finished in 153 seconds
2017-03-15 09:25:38 Removing build area /tmp/rear.VZ0sSt5OmzzRCw2
2017-03-15 09:25:38 End of program reached
- Work-around, if any:
gdha commented at 2017-03-17 12:57:¶
INIT: version 2.86 booting
INIT: cannot execute "/etc/scripts/boot"
INIT: cannot execute "/etc/scripts/system-setup"
INIT: Entering runlevel: 3
INIT: cannot execute "/etc/scripts/run-syslog"
INIT: Id "sy" respawning too fast: disabled for 5 minutes
Have a look at the start-up scripts found under
/usr/share/rear/skel/default/etc/scripts to see whether something
cannot work on your platform?
viper1986 commented at 2017-03-20 12:31:¶
Hi,
I add +x to all files in /usr/share/rear/skel/default/etc/scripts and
the error was clean.
But I still can't login.
Logs from booting in file.
rear_restore.txt
gdha commented at 2017-03-21 08:03:¶
@schabrolles Do you have any idea what happens here?
viper1986 commented at 2017-03-21 09:31:¶
Why default console is used hvc0 instead of tty0?
schabrolles commented at 2017-03-21 09:41:¶
@viper1986 : What is your environment PowerVM / PowerKVM / BareMetal ?
I usually not have any issue with Power+SLES11, but I will try to
replicate your setup.
Are you using rear 2.00 directly from git ?
hvc0 is the default console on POWER. it allows to connect remote console to HMC.
viper1986 commented at 2017-03-21 10:40:¶
I use PowerVM and REAR 2.00 from git.
jsmeix commented at 2017-03-21 10:48:¶
@viper1986
I did not yet read all the details above therefore
only a side note FYI regarding "default console":
and how to specify the right one as needed:
See the perhaps related USE_SERIAL_CONSOLE setting
and the scripts which use that and do some
"automagic things", cf.
https://github.com/rear/rear/issues/937
In particular when there is no serial port one may have to
explicitly specify the right USE_SERIAL_CONSOLE value
(perhaps even together with KERNEL_CMDLINE)
to get things right, cf.
https://github.com/rear/rear/issues/1199
and see in particular
https://github.com/rear/rear/issues/937#issuecomment-236144933
viper1986 commented at 2017-03-23 07:31:¶
I try to change console but booting hung in this state:
cdrom: Uniform CD-ROM driver Revision: 3.20
done.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.25.0-ioctl (2012-07-25) initialised:
dm-devel@redhat.com
Have you got some new information?
gdha commented at 2017-03-30 08:11:¶
@viper1986 Any progress made?
@schabrolles Did you succeed with your test setup to simulate the issue?
schabrolles commented at 2017-03-30 09:02:¶
@viper1986 Sorry for the long delay, I was in vacation (I'm still in vacation, but find some time to test something close to your setup).
Unfortunately, I was not able to reproduce your issue.
When booting to the RESCUE image, I can login to the console (hvc0).
Relax-and-Recover 2.00-git201703271326 / 2017-03-27
Relax-and-Recover comes with ABSOLUTELY NO WARRANTY; for details see
the GNU General Public License at: http://www.gnu.org/licenses/gpl.html
Host sles11sap-144 using Backup NETFS and Output PXE
Build date: Wed, 29 Mar 2017 18:10:53 +0200
Welcome to SLES for SAP Applications 11.4 (ppc64) - Kernel 3.0.101-63-ppc64 (hvc0).
sles11sap-144 login: root
Welcome to Relax-and-Recover. Run "rear recover" to restore your system !
RESCUE sles11sap-144:~ #
My setup is a bit different :
System : Power8 machine with PowerVM virtialization
VM : LPAR with SLES11 for SAP
My ReaR configuration is the following:
I use PXE server instead of ISO images ... (easier for me to test). I'm
not sure it can make a difference.
@jsmeix @gdha could you confirm ?
AUTOEXCLUDE_MULTIPATH=n
BOOT_OVER_SAN=y
### write the rescue initramfs to PXE server
OUTPUT=PXE
### create a backup using the internal NETFS method, using 'tar'
BACKUP=NETFS
### write both rescue image and backup to the device labeled REAR-000
BACKUP_URL="nfs://10.7.19.177/rear"
Your issue is may be related to the additional option you use
:(BACKUP=NSR, CFGHTML ...)
More tests are needed ...
gdha commented at 2018-01-12 08:26:¶
As there is no feedback anymore we close this issue
viper1986 commented at 2018-01-12 08:30:¶
Hi
Yes we can close this issue.
2018-01-12 9:26 GMT+01:00 gdha notifications@github.com:
Closed #1250 https://github.com/rear/rear/issues/1250.
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub
https://github.com/rear/rear/issues/1250#event-1421289819, or mute the
thread
https://github.com/notifications/unsubscribe-auth/ASaA9dsWygpgZ__vq2a8QYZZskibMw4lks5tJxcugaJpZM4MgSqy
.
[Export of Github issue for rear/rear.]