#2987 Issue open: Error with sudo rear mkopalpba¶
Labels: support / question
lamyergeier opened issue at 2023-05-12 21:57:¶
- ReaR version ("/usr/sbin/rear -V"):
[root@lamyer dist]# /usr/sbin/rear -V
Relax-and-Recover 2.7-git.4856.91e67155.unknown / 2022-07-14
-
If your ReaR version is not the current version, explain why you can't upgrade:
-
OS version ("cat /etc/os-release" or "lsb_release -a" or "cat /etc/rear/os.conf"):
LSB Version: :core-4.1-amd64:core-4.1-noarch
Distributor ID: Fedora
Description: Fedora release 38 (Thirty Eight)
Release: 38
Codename: ThirtyEight
- ReaR configuration files ("cat /etc/rear/site.conf" and/or "cat /etc/rear/local.conf"):
[root@lamyer dist]# cat /etc/rear/local.conf
# This file etc/rear/local.conf is intended for the user's
# manual configuration of Relax-and-Recover (ReaR).
# For configuration through packages and other automated means
# we recommend a separated file named site.conf next to this file
# and leave local.conf as is (ReaR upstream will never ship a site.conf).
# The default OUTPUT=ISO creates the ReaR rescue medium as ISO image.
# You need to specify your particular backup and restore method for your data
# as the default BACKUP=REQUESTRESTORE does not really do that (see "man rear").
# Configuration variables are documented in /usr/share/rear/conf/default.conf
# and the examples in /usr/share/rear/conf/examples/ can be used as templates.
# ReaR reads the configuration files via the bash builtin command 'source'
# so bash syntax like VARIABLE="value" (no spaces at '=') is mandatory.
# Because 'source' executes the content as bash scripts you can run commands
# within your configuration files, in particular commands to set different
# configuration values depending on certain conditions as you need like
# CONDITION_COMMAND && VARIABLE="special_value" || VARIABLE="usual_value"
# but that means CONDITION_COMMAND gets always executed when 'rear' is run
# so ensure nothing can go wrong if you run commands in configuration files.
OUTPUT=RAWDISK
OUTPUT_URL="file:///var/lib/rear/output"
-
Hardware vendor/product (PC or PowerNV BareMetal or ARM) or VM (KVM guest or PowerVM LPAR):
Laptop -
System architecture (x86 compatible or PPC64/PPC64LE or what exact ARM device):
x86 -
Firmware (BIOS or UEFI or Open Firmware) and bootloader (GRUB or ELILO or Petitboot):
UEFI, GRUB -
Storage (local disk or SSD) and/or SAN (FC or iSCSI or FCoE) and/or multipath (DM or NVMe):
SSD, NVMe -
Storage layout ("lsblk -ipo NAME,KNAME,PKNAME,TRAN,TYPE,FSTYPE,LABEL,SIZE,MOUNTPOINT"):
[root@lamyer dist]# lsblk -ipo NAME,KNAME,PKNAME,TRAN,TYPE,FSTYPE,LABEL,SIZE,MOUNTPOINT
NAME KNAME PKNAME TRAN TYPE FSTYPE LABEL SIZE MOUNTPOINT
/dev/zram0 /dev/zram0 disk 8G [SWAP]
/dev/nvme0n1 /dev/nvme0n1 nvme disk 931.5G
|-/dev/nvme0n1p1 /dev/nvme0n1p1 /dev/nvme0n1 nvme part ext4 768M
|-/dev/nvme0n1p2 /dev/nvme0n1p2 /dev/nvme0n1 nvme part ext4 FedoraBoot 768M /boot
|-/dev/nvme0n1p3 /dev/nvme0n1p3 /dev/nvme0n1 nvme part ext4 UnassignedBoot 768M
|-/dev/nvme0n1p4 /dev/nvme0n1p4 /dev/nvme0n1 nvme part vfat EFI-SP 128M /boot/efi
`-/dev/nvme0n1p5 /dev/nvme0n1p5 /dev/nvme0n1 nvme part crypto_ 929.1G
`-/dev/mapper/luks-4f9105ee-ae73-4e8c-b00f-a99035a95030
/dev/dm-0 /dev/nvme0n1p5 crypt LVM2_me 929.1G
|-/dev/mapper/vgubuntu-FedoraRoot /dev/dm-1 /dev/dm-0 lvm ext4 FedoraRoot 20G /
|-/dev/mapper/vgubuntu-FedoraSwap /dev/dm-2 /dev/dm-0 lvm swap FedoraSwap 32G [SWAP]
|-/dev/mapper/vgubuntu-UbuntuSwap /dev/dm-3 /dev/dm-0 lvm swap 32G
|-/dev/mapper/vgubuntu-UbuntuRoot /dev/dm-4 /dev/dm-0 lvm ext4 50G
|-/dev/mapper/vgubuntu-UbuntuHome /dev/dm-5 /dev/dm-0 lvm ext4 UbuntuHome 18G
|-/dev/mapper/vgubuntu-FedoraHome /dev/dm-6 /dev/dm-0 lvm ext4 FedoraHome 18G /home
|-/dev/mapper/vgubuntu-Backup /dev/dm-7 /dev/dm-0 lvm ext4 Backup 39.1G /mnt/Backu
|-/dev/mapper/vgubuntu-Documents /dev/dm-8 /dev/dm-0 lvm ext4 Documents 225G /mnt/Docum
|-/dev/mapper/vgubuntu-Data /dev/dm-9 /dev/dm-0 lvm ext4 Data 45G /mnt/Data
`-/dev/mapper/vgubuntu-Media /dev/dm-10 /dev/dm-0 lvm ext4 Media 450G /mnt/Media
- Description of the issue (ideally so that others can reproduce it):
I am following
rear/13-tcg-opal-support.adoc at master ยท
rear/rear
to use my new Self encrypting SSD.
I am doing
Step 2. Create Disk Images for PBA and Rescue
System
-
Workaround, if any:
-
Attachments, as applicable ("rear -D mkrescue/mkbackup/recover" debug log files):
You can drag-drop log files into this editor to create an attachment
or paste verbatim text like command output or file content
by including it between a leading and a closing line of
three backticks like this:
[root@lamyer dist]# sudo rear mkopalpba
TIP: Your system seems to include a Plymouth graphical boot animation. You can achieve a nicer user
interface for the PBA by setting OPAL_PBA_{PROGS,COPY_AS_IS,LIBS} to include Plymouth components.
ERROR: Failed to copy '/lib/modules/6.2.14-300.fc38.x86_64/kernel/arch/x86/crypto/crc32-pclmul.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/arch/x86/crypto/crc32c-intel.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/arch/x86/crypto/crct10dif-pclmul.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/arch/x86/crypto/ghash-clmulni-intel.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/arch/x86/crypto/polyval-clmulni.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/arch/x86/crypto/sha512-ssse3.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/arch/x86/events/intel/intel-cstate.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/arch/x86/events/intel/intel-uncore.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/arch/x86/events/rapl.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/arch/x86/kvm/kvm-intel.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/arch/x86/kvm/kvm.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/crypto/polyval-generic.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/acpi/acpi_pad.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/acpi/video.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/block/loop.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/block/zram/zram.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/bluetooth/btbcm.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/bluetooth/btintel.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/bluetooth/btmtk.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/bluetooth/btrtl.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/bluetooth/btusb.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/dma/idma64.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/edac/igen6_edac.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/gpu/drm/display/drm_display_helper.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/gpu/drm/drm_buddy.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/gpu/drm/i915/i915.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/gpu/drm/ttm/ttm.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/hid/hid-multitouch.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/hid/i2c-hid/i2c-hid-acpi.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/hid/i2c-hid/i2c-hid.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/hid/uhid.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/hwmon/coretemp.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/i2c/busses/i2c-i801.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/i2c/i2c-smbus.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/input/joydev.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/input/misc/pcspkr.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/input/misc/uinput.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/input/serio/serio_raw.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/leds/trigger/ledtrig-audio.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/md/dm-crypt.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/media/cec/core/cec.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/media/mc/mc.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/mfd/cros_ec_dev.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/mfd/intel_pmc_bxt.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/misc/eeprom/ee1004.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/misc/enclosure.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/misc/mei/hdcp/mei_hdcp.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/misc/mei/mei-me.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/misc/mei/mei.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/misc/mei/pxp/mei_pxp.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/net/wireless/intel/iwlwifi/iwlwifi.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/net/wireless/intel/iwlwifi/mvm/iwlmvm.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/nvme/common/nvme-common.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/nvme/host/nvme-core.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/nvme/host/nvme.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/pinctrl/intel/pinctrl-tigerlake.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/platform/chrome/cros_ec.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/platform/chrome/cros_ec_chardev.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/platform/chrome/cros_ec_lpcs.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/platform/chrome/cros_ec_sysfs.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/platform/chrome/cros_usbpd_logger.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/platform/chrome/cros_usbpd_notify.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/platform/x86/intel/intel_vsec.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/platform/x86/intel/pmt/pmt_class.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/platform/x86/intel/pmt/pmt_telemetry.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/platform/x86/wmi-bmof.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/platform/x86/wmi.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/power/supply/cros_usbpd-charger.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/powercap/intel_rapl_common.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/powercap/intel_rapl_msr.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/scsi/scsi_transport_sas.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/scsi/ses.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/soundwire/soundwire-bus.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/soundwire/soundwire-cadence.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/soundwire/soundwire-generic-allocation.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/soundwire/soundwire-intel.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/thermal/intel/int340x_thermal/int3400_thermal.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/thermal/intel/int340x_thermal/int3403_thermal.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/thermal/intel/int340x_thermal/int340x_thermal_zone.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/thermal/intel/int340x_thermal/processor_thermal_device.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/thermal/intel/int340x_thermal/processor_thermal_device_pci.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/thermal/intel/int340x_thermal/processor_thermal_mbox.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/thermal/intel/int340x_thermal/processor_thermal_rapl.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/thermal/intel/int340x_thermal/processor_thermal_rfim.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/thermal/intel/intel_powerclamp.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/thermal/intel/x86_pkg_temp_thermal.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/thunderbolt/thunderbolt.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/usb/misc/apple-mfi-fastcharge.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/usb/storage/uas.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/usb/storage/usb-storage.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/usb/typec/typec.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/usb/typec/ucsi/typec_ucsi.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/usb/typec/ucsi/ucsi_acpi.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/watchdog/iTCO_vendor_support.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/watchdog/iTCO_wdt.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/drivers/watchdog/mei_wdt.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/fs/binfmt_misc.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/fs/fat/fat.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/fs/fat/vfat.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/fs/fuse/fuse.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/lib/crypto/libarc4.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/net/bluetooth/bluetooth.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/net/bluetooth/bnep/bnep.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/net/bluetooth/rfcomm/rfcomm.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/net/ipv4/netfilter/ip_tables.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/net/ipv4/netfilter/nf_defrag_ipv4.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/net/ipv4/netfilter/nf_reject_ipv4.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/net/ipv4/netfilter/nft_fib_ipv4.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/net/ipv6/netfilter/ip6_tables.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/net/ipv6/netfilter/nf_defrag_ipv6.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/net/ipv6/netfilter/nf_reject_ipv6.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/net/ipv6/netfilter/nft_fib_ipv6.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/net/mac80211/mac80211.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/net/netfilter/ipset/ip_set.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/net/netfilter/nf_conntrack.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/net/netfilter/nf_conntrack_broadcast.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/net/netfilter/nf_conntrack_netbios_ns.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/net/netfilter/nf_nat.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/net/netfilter/nf_tables.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/net/netfilter/nfnetlink.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/net/netfilter/nft_chain_nat.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/net/netfilter/nft_ct.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/net/netfilter/nft_fib.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/net/netfilter/nft_fib_inet.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/net/netfilter/nft_reject.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/net/netfilter/nft_reject_inet.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/net/qrtr/qrtr.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/net/rfkill/rfkill.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/net/sunrpc/sunrpc.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/net/wireless/cfg80211.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/sound/ac97_bus.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/sound/core/seq/snd-seq-dummy.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/sound/core/seq/snd-seq.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/sound/core/snd-compress.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/sound/core/snd-hrtimer.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/sound/core/snd-hwdep.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/sound/core/snd-pcm-dmaengine.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/sound/core/snd-pcm.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/sound/core/snd-rawmidi.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/sound/core/snd-seq-device.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/sound/core/snd-timer.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/sound/core/snd.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/sound/hda/ext/snd-hda-ext-core.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/sound/hda/snd-hda-core.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/sound/hda/snd-intel-dspcfg.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/sound/hda/snd-intel-sdw-acpi.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/sound/pci/hda/snd-hda-codec-generic.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/sound/pci/hda/snd-hda-codec-hdmi.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/sound/pci/hda/snd-hda-codec-idt.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/sound/pci/hda/snd-hda-codec.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/sound/pci/hda/snd-hda-intel.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/sound/soc/codecs/snd-soc-hdac-hda.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/sound/soc/intel/common/snd-soc-acpi-intel-match.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/sound/soc/snd-soc-acpi.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/sound/soc/snd-soc-core.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/sound/soc/sof/intel/snd-sof-intel-hda-common.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/sound/soc/sof/intel/snd-sof-intel-hda.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/sound/soc/sof/intel/snd-sof-pci-intel-tgl.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/sound/soc/sof/snd-sof-pci.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/sound/soc/sof/snd-sof-utils.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/sound/soc/sof/snd-sof.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/sound/soc/sof/xtensa/snd-sof-xtensa-dsp.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/sound/soundcore.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/sound/usb/snd-usb-audio.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/sound/usb/snd-usbmidi-lib.ko.xz
/lib/modules/6.2.14-300.fc38.x86_64/kernel/virt/lib/irqbypass.ko.xz'
Some latest log messages since the last called script 400_copy_modules.sh:
2023-05-12 23:49:13.262944674 Copying only currently loaded kernel modules (MODULES contains 'loaded_modules') and those in MODULES_LOAD
Some messages from /var/tmp/rear.vj52tTf8pfUBtjL/tmp/rear.mkopalpba.stdout_stderr since the last called script 400_copy_modules.sh:
cp: 'lib/modules/6.2.14-300.fc38.x86_64/kernel/sound/hda/ext': No such file or directory
cp: 'lib/modules/6.2.14-300.fc38.x86_64/kernel/sound/pci/hda': No such file or directory
cp: 'lib/modules/6.2.14-300.fc38.x86_64/kernel/sound/soc/codecs': No such file or directory
cp: 'lib/modules/6.2.14-300.fc38.x86_64/kernel/sound/soc/intel/common': No such file or directory
cp: 'lib/modules/6.2.14-300.fc38.x86_64/kernel/sound/soc/sof/intel': No such file or directory
cp: 'lib/modules/6.2.14-300.fc38.x86_64/kernel/sound/soc/sof/xtensa': No such file or directory
cp: 'lib/modules/6.2.14-300.fc38.x86_64/kernel/sound/usb': No such file or directory
cp: 'lib/modules/6.2.14-300.fc38.x86_64/kernel/virt/lib': No such file or directory
Use debug mode '-d' for some debug messages or debugscript mode '-D' for full debug messages with 'set -x' output
Aborting due to an error, check /var/log/rear/rear-lamyer.log for details
Terminated
[root@lamyer dist]# cat /var/log/rear/rear-lamyer.log
2023-05-12 23:55:57.909644980 Relax-and-Recover 2.7-git.4856.91e67155.unknown / 2022-07-14
2023-05-12 23:55:57.911910570 Running rear mkrescue/mkbackup/recover (PID 363489 date 2023-05-12 23:55:57)
2023-05-12 23:55:57.914397574 Command line options: /usr/sbin/rear -D mkrescue/mkbackup/recover
2023-05-12 23:55:57.916677890 Using log file: /var/log/rear/rear-lamyer.log
2023-05-12 23:55:57.918878989 Using build area: /var/tmp/rear.KtyH42hZoI3nzQW
2023-05-12 23:55:57.921140656 Current set of flags is 'hB'
2023-05-12 23:55:57.923104663 The debugscripts flags are 'x'
2023-05-12 23:55:57.925100507 Combining configuration files
2023-05-12 23:55:57.927515477 Including /etc/rear/os.conf
2023-05-12 23:55:57.929261530 Entering debugscript mode via 'set -x'.
+ source /etc/rear/os.conf
++ OS_VENDOR=RedHatEnterpriseServer
++ OS_VERSION=VERSION_ID=38
+ source_return_code=0
+ test 0 -eq 0
+ cd /mnt/Data/Downloads/Software/rear/dist
+ test 1
+ Debug 'Leaving debugscript mode (back to previous bash flags and options settings).'
+ test 1
+ Log 'Leaving debugscript mode (back to previous bash flags and options settings).'
+ test -w /var/log/rear/rear-lamyer.log
+ echo '2023-05-12 23:55:57.933148252 Leaving debugscript mode (back to previous bash flags and options settings).'
2023-05-12 23:55:57.933148252 Leaving debugscript mode (back to previous bash flags and options settings).
2023-05-12 23:55:57.936545246 Including conf/Linux-i386.conf
2023-05-12 23:55:57.938404403 Entering debugscript mode via 'set -x'.
+ source /usr/share/rear/conf/Linux-i386.conf
++ REQUIRED_PROGS+=(sfdisk)
++ PROGS+=(grub lilo)
+ source_return_code=0
+ test 0 -eq 0
+ cd /mnt/Data/Downloads/Software/rear/dist
+ test 1
+ Debug 'Leaving debugscript mode (back to previous bash flags and options settings).'
+ test 1
+ Log 'Leaving debugscript mode (back to previous bash flags and options settings).'
+ test -w /var/log/rear/rear-lamyer.log
+ echo '2023-05-12 23:55:57.942016407 Leaving debugscript mode (back to previous bash flags and options settings).'
2023-05-12 23:55:57.942016407 Leaving debugscript mode (back to previous bash flags and options settings).
2023-05-12 23:55:57.944354524 Including conf/GNU/Linux.conf
2023-05-12 23:55:57.946342906 Entering debugscript mode via 'set -x'.
+ source /usr/share/rear/conf/GNU/Linux.conf
++ REQUIRED_PROGS+=(chroot ip less parted readlink yes)
++ PROGS+=(partprobe fdisk cfdisk sfdisk)
++ PROGS+=(rpc.statd rpcbind mknod blkid vol_id udev_volume_id portmap rpcinfo tac reboot halt shutdown killall5 killall tee ifconfig nslookup route ifenslave ifrename nameif klogd syslog-ng syslogd rsyslogd date rmdir init telinit ethtool expand insmod modprobe lsmod true false mingetty agetty getty rmmod hostname uname sleep logger pstree ln dirname basename tty ping netstat free traceroute xxd vi pico nano rmmod df dmesg du gzip netcat curl top iptraf joe getent id ldd strace rsync tail head find md5sum mkfs mkfs.ext2 mkfs.ext3 mkfs.ext4 mkfs.ext4dev mkfs.jfs mkfs.xfs mkfs.reiserfs mkfs.vfat mkfs.btrfs mkreiserfs fsck fsck.ext2 fsck.ext3 fsck.ext4 fsck.ext4dev fsck.xfs fsck.reiserfs reiserfsck fsck.btrfs findmnt btrfsck tune2fs tune4fs xfs_admin xfs_db xfs_repair xfs_info xfs_growfs btrfs jfs_tune reiserfstune egrep fgrep chmod chown stat mkswap swapon swapoff mknod touch scsi_id lsscsi logd initctl lspci usleep mktemp /bin/true strace which mkfifo seq openvt poweroff chacl getfacl setfacl attr getfattr setfattr mpath_wait xargs sg_inq env w dosfslabel sysctl blockdev lsblk clear dmsetup dmeventd)
++ LIBS+=(/lib*/libnss_dns* /lib*/libnss_files* /lib/*/libnss_dns* /lib/*/libnss_files* /lib*/libgcc_s* /lib*/libresolv* /usr/lib*/rsyslog/*so /lib*/rsyslog/*so /usr/lib*/syslog-ng/*so /lib*/libnsspem.so* /usr/lib*/libnsspem.so* /lib*/libfreebl*.so* /usr/lib*/libfreebl*.so* /lib*/libnss3.so* /usr/lib*/libnss3.so* /lib*/libnssutil3.so* /usr/lib*/libnssutil3.so* /lib*/libsoftokn3.so* /usr/lib*/libsoftokn3.so* /lib*/libsqlite3.so* /usr/lib*/libsqlite3.so* /lib*/libfreeblpriv3.so* /usr/lib*/libfreeblpriv3.so* /lib*/libssl.so* /usr/lib*/libssl.so* /lib*/libnssdbm3.so* /usr/lib*/libnssdbm3.so*)
++ COPY_AS_IS+=(/dev /etc/inputr[c] /etc/protocols /etc/services /etc/rpc /etc/termcap /etc/terminfo /lib*/terminfo /usr/share/terminfo /etc/netconfig /etc/mke2fs.conf /etc/*-release /etc/localtime /etc/magic /usr/share/misc/magic /etc/dracut.conf /etc/dracut.conf.d /usr/lib/dracut /sbin/modprobe.ksplice-orig /etc/sysctl.conf /etc/sysctl.d /etc/e2fsck.conf)
++ COPY_AS_IS+=(/usr/libexec/vi)
++ COPY_AS_IS+=('/etc/ssl/certs/*' '/etc/pki/*' '/usr/lib/ssl/*' '/usr/share/ca-certificates/*' '/etc/ca-certificates/*')
++ COPY_AS_IS_EXCLUDE+=(dev/shm/\*)
++ COPY_AS_IS_EXCLUDE+=('/etc/pki/tls/private' '/etc/pki/CA/private' '/etc/pki/nssdb/key*.db' '/usr/lib/ssl/private')
++ KERNEL_CMDLINE+=' selinux=0'
++ CLONE_USERS+=(daemon rpc usbmuxd usbmux vcsa nobody dbus)
++ CLONE_GROUPS+=(tty usbmuxd usbmux fuse kvm oinstall dbus)
++ type -p lspci
++ lspci
++ grep --quiet ' VGA .*AMD'
+ source_return_code=0
+ test 0 -eq 0
+ cd /mnt/Data/Downloads/Software/rear/dist
+ test 1
+ Debug 'Leaving debugscript mode (back to previous bash flags and options settings).'
+ test 1
+ Log 'Leaving debugscript mode (back to previous bash flags and options settings).'
+ test -w /var/log/rear/rear-lamyer.log
+ echo '2023-05-12 23:55:58.148147338 Leaving debugscript mode (back to previous bash flags and options settings).'
2023-05-12 23:55:58.148147338 Leaving debugscript mode (back to previous bash flags and options settings).
2023-05-12 23:55:58.152199861 Including /etc/rear/local.conf
2023-05-12 23:55:58.154726972 Entering debugscript mode via 'set -x'.
+ source /etc/rear/local.conf
++ OUTPUT=RAWDISK
++ OUTPUT_URL=file:///var/lib/rear/output
+ source_return_code=0
+ test 0 -eq 0
+ cd /mnt/Data/Downloads/Software/rear/dist
+ test 1
+ Debug 'Leaving debugscript mode (back to previous bash flags and options settings).'
+ test 1
+ Log 'Leaving debugscript mode (back to previous bash flags and options settings).'
+ test -w /var/log/rear/rear-lamyer.log
+ echo '2023-05-12 23:55:58.159268834 Leaving debugscript mode (back to previous bash flags and options settings).'
2023-05-12 23:55:58.159268834 Leaving debugscript mode (back to previous bash flags and options settings).
2023-05-12 23:55:58.162810292 ======================
2023-05-12 23:55:58.165110547 Running 'init' stage
2023-05-12 23:55:58.167367958 ======================
2023-05-12 23:55:58.173558631 Including init/default/005_verify_os_conf.sh
2023-05-12 23:55:58.175939696 Entering debugscript mode via 'set -x'.
+ source /usr/share/rear/init/default/005_verify_os_conf.sh
++ test -f /etc/rear/os.conf
++ return
+ source_return_code=0
+ test 0 -eq 0
+ cd /mnt/Data/Downloads/Software/rear/dist
+ test 1
+ Debug 'Leaving debugscript mode (back to previous bash flags and options settings).'
+ test 1
+ Log 'Leaving debugscript mode (back to previous bash flags and options settings).'
+ test -w /var/log/rear/rear-lamyer.log
+ echo '2023-05-12 23:55:58.180436540 Leaving debugscript mode (back to previous bash flags and options settings).'
2023-05-12 23:55:58.180436540 Leaving debugscript mode (back to previous bash flags and options settings).
2023-05-12 23:55:58.184593869 Including init/default/010_EFISTUB_check.sh
2023-05-12 23:55:58.186664490 Entering debugscript mode via 'set -x'.
+ source /usr/share/rear/init/default/010_EFISTUB_check.sh
++ is_false no
++ case "$1" in
++ return 0
+ source_return_code=0
+ test 0 -eq 0
+ cd /mnt/Data/Downloads/Software/rear/dist
+ test 1
+ Debug 'Leaving debugscript mode (back to previous bash flags and options settings).'
+ test 1
+ Log 'Leaving debugscript mode (back to previous bash flags and options settings).'
+ test -w /var/log/rear/rear-lamyer.log
+ echo '2023-05-12 23:55:58.190742267 Leaving debugscript mode (back to previous bash flags and options settings).'
2023-05-12 23:55:58.190742267 Leaving debugscript mode (back to previous bash flags and options settings).
2023-05-12 23:55:58.194749516 Including init/default/010_set_drlm_env.sh
2023-05-12 23:55:58.196726768 Entering debugscript mode via 'set -x'.
+ source /usr/share/rear/init/default/010_set_drlm_env.sh
++ is_true n
++ case "$1" in
++ return 1
++ return 0
+ source_return_code=0
+ test 0 -eq 0
+ cd /mnt/Data/Downloads/Software/rear/dist
+ test 1
+ Debug 'Leaving debugscript mode (back to previous bash flags and options settings).'
+ test 1
+ Log 'Leaving debugscript mode (back to previous bash flags and options settings).'
+ test -w /var/log/rear/rear-lamyer.log
+ echo '2023-05-12 23:55:58.200717023 Leaving debugscript mode (back to previous bash flags and options settings).'
2023-05-12 23:55:58.200717023 Leaving debugscript mode (back to previous bash flags and options settings).
2023-05-12 23:55:58.205221060 Including init/default/030_update_recovery_system.sh
2023-05-12 23:55:58.207450521 Entering debugscript mode via 'set -x'.
+ source /usr/share/rear/init/default/030_update_recovery_system.sh
++ test ''
++ return 0
+ source_return_code=0
+ test 0 -eq 0
+ cd /mnt/Data/Downloads/Software/rear/dist
+ test 1
+ Debug 'Leaving debugscript mode (back to previous bash flags and options settings).'
+ test 1
+ Log 'Leaving debugscript mode (back to previous bash flags and options settings).'
+ test -w /var/log/rear/rear-lamyer.log
+ echo '2023-05-12 23:55:58.211632850 Leaving debugscript mode (back to previous bash flags and options settings).'
2023-05-12 23:55:58.211632850 Leaving debugscript mode (back to previous bash flags and options settings).
2023-05-12 23:55:58.216442185 Including init/default/050_check_rear_recover_mode.sh
2023-05-12 23:55:58.218842721 Entering debugscript mode via 'set -x'.
+ source /usr/share/rear/init/default/050_check_rear_recover_mode.sh
++ test -f /etc/rear-release
++ case "$WORKFLOW" in
++ LogPrint 'Running workflow mkrescue/mkbackup/recover on the normal/original system'
++ Log 'Running workflow mkrescue/mkbackup/recover on the normal/original system'
++ test -w /var/log/rear/rear-lamyer.log
++ echo '2023-05-12 23:55:58.223686897 Running workflow mkrescue/mkbackup/recover on the normal/original system'
2023-05-12 23:55:58.223686897 Running workflow mkrescue/mkbackup/recover on the normal/original system
++ Print 'Running workflow mkrescue/mkbackup/recover on the normal/original system'
+ source_return_code=0
+ test 0 -eq 0
+ cd /mnt/Data/Downloads/Software/rear/dist
+ test 1
+ Debug 'Leaving debugscript mode (back to previous bash flags and options settings).'
+ test 1
+ Log 'Leaving debugscript mode (back to previous bash flags and options settings).'
+ test -w /var/log/rear/rear-lamyer.log
+ echo '2023-05-12 23:55:58.226680148 Leaving debugscript mode (back to previous bash flags and options settings).'
2023-05-12 23:55:58.226680148 Leaving debugscript mode (back to previous bash flags and options settings).
2023-05-12 23:55:58.231947457 Including init/default/950_check_missing_programs.sh
2023-05-12 23:55:58.234269229 Entering debugscript mode via 'set -x'.
+ source /usr/share/rear/init/default/950_check_missing_programs.sh
++ local prog
++ missing_progs=()
++ local missing_progs
++ for prog in "${REQUIRED_PROGS[@]}"
++ has_binary /usr/sbin/rear
++ for bin in "$@"
++ type /usr/sbin/rear
++ return 0
++ for prog in "${REQUIRED_PROGS[@]}"
++ has_binary awk
++ for bin in "$@"
++ type awk
++ return 0
++ for prog in "${REQUIRED_PROGS[@]}"
++ has_binary bash
++ for bin in "$@"
++ type bash
++ return 0
++ for prog in "${REQUIRED_PROGS[@]}"
++ has_binary bc
++ for bin in "$@"
++ type bc
++ return 0
++ for prog in "${REQUIRED_PROGS[@]}"
++ has_binary cat
++ for bin in "$@"
++ type cat
++ return 0
++ for prog in "${REQUIRED_PROGS[@]}"
++ has_binary cmp
++ for bin in "$@"
++ type cmp
++ return 0
++ for prog in "${REQUIRED_PROGS[@]}"
++ has_binary cp
++ for bin in "$@"
++ type cp
++ return 0
++ for prog in "${REQUIRED_PROGS[@]}"
++ has_binary cpio
++ for bin in "$@"
++ type cpio
++ return 0
++ for prog in "${REQUIRED_PROGS[@]}"
++ has_binary cut
++ for bin in "$@"
++ type cut
++ return 0
++ for prog in "${REQUIRED_PROGS[@]}"
++ has_binary dd
++ for bin in "$@"
++ type dd
++ return 0
++ for prog in "${REQUIRED_PROGS[@]}"
++ has_binary diff
++ for bin in "$@"
++ type diff
++ return 0
++ for prog in "${REQUIRED_PROGS[@]}"
++ has_binary df
++ for bin in "$@"
++ type df
++ return 0
++ for prog in "${REQUIRED_PROGS[@]}"
++ has_binary dumpkeys
++ for bin in "$@"
++ type dumpkeys
++ return 0
++ for prog in "${REQUIRED_PROGS[@]}"
++ has_binary echo
++ for bin in "$@"
++ type echo
++ return 0
++ for prog in "${REQUIRED_PROGS[@]}"
++ has_binary expr
++ for bin in "$@"
++ type expr
++ return 0
++ for prog in "${REQUIRED_PROGS[@]}"
++ has_binary file
++ for bin in "$@"
++ type file
++ return 0
++ for prog in "${REQUIRED_PROGS[@]}"
++ has_binary getopt
++ for bin in "$@"
++ type getopt
++ return 0
++ for prog in "${REQUIRED_PROGS[@]}"
++ has_binary grep
++ for bin in "$@"
++ type grep
++ return 0
++ for prog in "${REQUIRED_PROGS[@]}"
++ has_binary join
++ for bin in "$@"
++ type join
++ return 0
++ for prog in "${REQUIRED_PROGS[@]}"
++ has_binary kbd_mode
++ for bin in "$@"
++ type kbd_mode
++ return 0
++ for prog in "${REQUIRED_PROGS[@]}"
++ has_binary loadkeys
++ for bin in "$@"
++ type loadkeys
++ return 0
++ for prog in "${REQUIRED_PROGS[@]}"
++ has_binary ls
++ for bin in "$@"
++ type ls
++ return 0
++ for prog in "${REQUIRED_PROGS[@]}"
++ has_binary mkdir
++ for bin in "$@"
++ type mkdir
++ return 0
++ for prog in "${REQUIRED_PROGS[@]}"
++ has_binary mount
++ for bin in "$@"
++ type mount
++ return 0
++ for prog in "${REQUIRED_PROGS[@]}"
++ has_binary mountpoint
++ for bin in "$@"
++ type mountpoint
++ return 0
++ for prog in "${REQUIRED_PROGS[@]}"
++ has_binary mv
++ for bin in "$@"
++ type mv
++ return 0
++ for prog in "${REQUIRED_PROGS[@]}"
++ has_binary pidof
++ for bin in "$@"
++ type pidof
++ return 0
++ for prog in "${REQUIRED_PROGS[@]}"
++ has_binary ps
++ for bin in "$@"
++ type ps
++ return 0
++ for prog in "${REQUIRED_PROGS[@]}"
++ has_binary pwd
++ for bin in "$@"
++ type pwd
++ return 0
++ for prog in "${REQUIRED_PROGS[@]}"
++ has_binary rm
++ for bin in "$@"
++ type rm
++ return 0
++ for prog in "${REQUIRED_PROGS[@]}"
++ has_binary sed
++ for bin in "$@"
++ type sed
++ return 0
++ for prog in "${REQUIRED_PROGS[@]}"
++ has_binary seq
++ for bin in "$@"
++ type seq
++ return 0
++ for prog in "${REQUIRED_PROGS[@]}"
++ has_binary sort
++ for bin in "$@"
++ type sort
++ return 0
++ for prog in "${REQUIRED_PROGS[@]}"
++ has_binary strings
++ for bin in "$@"
++ type strings
++ return 0
++ for prog in "${REQUIRED_PROGS[@]}"
++ has_binary sync
++ for bin in "$@"
++ type sync
++ return 0
++ for prog in "${REQUIRED_PROGS[@]}"
++ has_binary tar
++ for bin in "$@"
++ type tar
++ return 0
++ for prog in "${REQUIRED_PROGS[@]}"
++ has_binary test
++ for bin in "$@"
++ type test
++ return 0
++ for prog in "${REQUIRED_PROGS[@]}"
++ has_binary tr
++ for bin in "$@"
++ type tr
++ return 0
++ for prog in "${REQUIRED_PROGS[@]}"
++ has_binary umount
++ for bin in "$@"
++ type umount
++ return 0
++ for prog in "${REQUIRED_PROGS[@]}"
++ has_binary uniq
++ for bin in "$@"
++ type uniq
++ return 0
++ for prog in "${REQUIRED_PROGS[@]}"
++ has_binary wc
++ for bin in "$@"
++ type wc
++ return 0
++ for prog in "${REQUIRED_PROGS[@]}"
++ has_binary sfdisk
++ for bin in "$@"
++ type sfdisk
++ return 0
++ for prog in "${REQUIRED_PROGS[@]}"
++ has_binary chroot
++ for bin in "$@"
++ type chroot
++ return 0
++ for prog in "${REQUIRED_PROGS[@]}"
++ has_binary ip
++ for bin in "$@"
++ type ip
++ return 0
++ for prog in "${REQUIRED_PROGS[@]}"
++ has_binary less
++ for bin in "$@"
++ type less
++ return 0
++ for prog in "${REQUIRED_PROGS[@]}"
++ has_binary parted
++ for bin in "$@"
++ type parted
++ return 0
++ for prog in "${REQUIRED_PROGS[@]}"
++ has_binary readlink
++ for bin in "$@"
++ type readlink
++ return 0
++ for prog in "${REQUIRED_PROGS[@]}"
++ has_binary yes
++ for bin in "$@"
++ type yes
++ return 0
++ contains_visible_char ''
+++ tr -d -c '[:graph:]'
++ test ''
++ return 0
+ source_return_code=0
+ test 0 -eq 0
+ cd /mnt/Data/Downloads/Software/rear/dist
+ test 1
+ Debug 'Leaving debugscript mode (back to previous bash flags and options settings).'
+ test 1
+ Log 'Leaving debugscript mode (back to previous bash flags and options settings).'
+ test -w /var/log/rear/rear-lamyer.log
+ echo '2023-05-12 23:55:58.241219505 Leaving debugscript mode (back to previous bash flags and options settings).'
2023-05-12 23:55:58.241219505 Leaving debugscript mode (back to previous bash flags and options settings).
2023-05-12 23:55:58.243754871 Finished running 'init' stage in 0 seconds
/usr/share/rear/lib/_input-output-functions.sh: line 525: type: WORKFLOW_mkrescue/mkbackup/recover: not found
2023-05-12 23:55:58.248023446 ERROR: The specified command 'mkrescue/mkbackup/recover' does not exist!
+ LogPrint 'Exiting rear mkrescue/mkbackup/recover (PID 363489) and its descendant processes ...'
+ Log 'Exiting rear mkrescue/mkbackup/recover (PID 363489) and its descendant processes ...'
+ test -w /var/log/rear/rear-lamyer.log
+ echo '2023-05-12 23:55:58.252422526 Exiting rear mkrescue/mkbackup/recover (PID 363489) and its descendant processes ...'
2023-05-12 23:55:58.252422526 Exiting rear mkrescue/mkbackup/recover (PID 363489) and its descendant processes ...
+ Print 'Exiting rear mkrescue/mkbackup/recover (PID 363489) and its descendant processes ...'
+ sleep 3
+ log_descendants_pids
++ pstree -Aplau 363489
+ Log 'rear,363489 /usr/sbin/rear -D mkrescue/mkbackup/recover
`-rear,363868 /usr/sbin/rear -D mkrescue/mkbackup/recover
`-pstree,363869 -Aplau 363489'
+ test -w /var/log/rear/rear-lamyer.log
+ echo '2023-05-12 23:56:01.302165685 rear,363489 /usr/sbin/rear -D mkrescue/mkbackup/recover
`-rear,363868 /usr/sbin/rear -D mkrescue/mkbackup/recover
`-pstree,363869 -Aplau 363489'
2023-05-12 23:56:01.302165685 rear,363489 /usr/sbin/rear -D mkrescue/mkbackup/recover
`-rear,363868 /usr/sbin/rear -D mkrescue/mkbackup/recover
`-pstree,363869 -Aplau 363489
+ terminate_descendants_from_grandchildren_to_children
+ local remaining_columns
+ test 121
+ remaining_columns=121
+ remaining_columns=81
+ test 81 -ge 40
+ local descendant_pid=
+ local not_yet_terminated_pids=
++ descendants_pids 363489
++ local parent_pid=363489
++ kill -0 363489
++ local child_pid=
+++ ps --ppid 363489 -o pid=
++ for child_pid in $(ps --ppid $parent_pid -o pid=)
++ kill -0 363874
++ descendants_pids 363874
++ local parent_pid=363874
++ kill -0 363874
++ local child_pid=
+++ ps --ppid 363874 -o pid=
++ for child_pid in $(ps --ppid $parent_pid -o pid=)
++ kill -0 363877
++ kill -0 363874
++ echo 363874
++ kill -0 363489
++ echo 363489
+ for descendant_pid in $(descendants_pids $MASTER_PID)
+ test 363489 -eq 363874
+ kill -0 363874
/usr/share/rear/lib/_input-output-functions.sh: line 151: kill: (363874) - No such process
+ continue
+ for descendant_pid in $(descendants_pids $MASTER_PID)
+ test 363489 -eq 363489
+ continue
+ test ''
+ return 0
+ LogPrint 'Running exit tasks'
+ Log 'Running exit tasks'
+ test -w /var/log/rear/rear-lamyer.log
+ echo '2023-05-12 23:56:01.318864143 Running exit tasks'
2023-05-12 23:56:01.318864143 Running exit tasks
+ Print 'Running exit tasks'
+ local exit_task=
+ for exit_task in "${EXIT_TASKS[@]}"
+ Debug 'Exit task '\''cleanup_build_area_and_end_program'\'''
+ test 1
+ Log 'Exit task '\''cleanup_build_area_and_end_program'\'''
+ test -w /var/log/rear/rear-lamyer.log
+ echo '2023-05-12 23:56:01.321337654 Exit task '\''cleanup_build_area_and_end_program'\'''
2023-05-12 23:56:01.321337654 Exit task 'cleanup_build_area_and_end_program'
+ eval cleanup_build_area_and_end_program
++ cleanup_build_area_and_end_program
++ local mounted_in_BUILD_DIR
+++ date +%s
++ Log 'Finished rear mkrescue/mkbackup/recover in 4 seconds'
++ test -w /var/log/rear/rear-lamyer.log
++ echo '2023-05-12 23:56:01.324579911 Finished rear mkrescue/mkbackup/recover in 4 seconds'
2023-05-12 23:56:01.324579911 Finished rear mkrescue/mkbackup/recover in 4 seconds
++ has_binary is_true
++ for bin in "$@"
++ type is_true
++ return 0
++ is_true 1
++ case "$1" in
++ return 0
+++ mount
+++ grep /var/tmp/rear.KtyH42hZoI3nzQW
+++ sed -e 's/^/ /'
++ mounted_in_BUILD_DIR=
++ test ''
++ LogPrint 'To remove the build area you may use (with caution): rm -Rf --one-file-system /var/tmp/rear.KtyH42hZoI3nzQW'
++ Log 'To remove the build area you may use (with caution): rm -Rf --one-file-system /var/tmp/rear.KtyH42hZoI3nzQW'
++ test -w /var/log/rear/rear-lamyer.log
++ echo '2023-05-12 23:56:01.329181358 To remove the build area you may use (with caution): rm -Rf --one-file-system /var/tmp/rear.KtyH42hZoI3nzQW'
2023-05-12 23:56:01.329181358 To remove the build area you may use (with caution): rm -Rf --one-file-system /var/tmp/rear.KtyH42hZoI3nzQW
++ Print 'To remove the build area you may use (with caution): rm -Rf --one-file-system /var/tmp/rear.KtyH42hZoI3nzQW'
++ Log 'End of program '\''rear'\'' reached'
++ test -w /var/log/rear/rear-lamyer.log
++ echo '2023-05-12 23:56:01.331679550 End of program '\''rear'\'' reached'
2023-05-12 23:56:01.331679550 End of program 'rear' reached
+ for exit_task in "${EXIT_TASKS[@]}"
+ Debug 'Exit task '\''(( EXIT_FAIL_MESSAGE )) && echo '\''rear mkrescue/mkbackup/recover failed, check /var/log/rear/rear-lamyer.log for details'\'' 1>&8'\'''
+ test 1
+ Log 'Exit task '\''(( EXIT_FAIL_MESSAGE )) && echo '\''rear mkrescue/mkbackup/recover failed, check /var/log/rear/rear-lamyer.log for details'\'' 1>&8'\'''
+ test -w /var/log/rear/rear-lamyer.log
+ echo '2023-05-12 23:56:01.333894870 Exit task '\''(( EXIT_FAIL_MESSAGE )) && echo '\''rear mkrescue/mkbackup/recover failed, check /var/log/rear/rear-lamyer.log for details'\'' 1>&8'\'''
2023-05-12 23:56:01.333894870 Exit task '(( EXIT_FAIL_MESSAGE )) && echo 'rear mkrescue/mkbackup/recover failed, check /var/log/rear/rear-lamyer.log for details' 1>&8'
+ eval '(( EXIT_FAIL_MESSAGE )) && echo '\''rear mkrescue/mkbackup/recover failed, check /var/log/rear/rear-lamyer.log for details'\'' 1>&8'
++ (( EXIT_FAIL_MESSAGE ))
+ for exit_task in "${EXIT_TASKS[@]}"
+ Debug 'Exit task '\''exec 8>&-'\'''
+ test 1
+ Log 'Exit task '\''exec 8>&-'\'''
+ test -w /var/log/rear/rear-lamyer.log
+ echo '2023-05-12 23:56:01.336157876 Exit task '\''exec 8>&-'\'''
2023-05-12 23:56:01.336157876 Exit task 'exec 8>&-'
+ eval 'exec 8>&-'
++ exec
+ for exit_task in "${EXIT_TASKS[@]}"
+ Debug 'Exit task '\''exec 7>&-'\'''
+ test 1
+ Log 'Exit task '\''exec 7>&-'\'''
+ test -w /var/log/rear/rear-lamyer.log
+ echo '2023-05-12 23:56:01.338479654 Exit task '\''exec 7>&-'\'''
2023-05-12 23:56:01.338479654 Exit task 'exec 7>&-'
+ eval 'exec 7>&-'
++ exec
+ for exit_task in "${EXIT_TASKS[@]}"
+ Debug 'Exit task '\''exec 6<&-'\'''
+ test 1
+ Log 'Exit task '\''exec 6<&-'\'''
+ test -w /var/log/rear/rear-lamyer.log
+ echo '2023-05-12 23:56:01.340914555 Exit task '\''exec 6<&-'\'''
2023-05-12 23:56:01.340914555 Exit task 'exec 6<&-'
+ eval 'exec 6<&-'
++ exec
+ for exit_task in "${EXIT_TASKS[@]}"
+ Debug 'Exit task '\'''\'''
+ test 1
+ Log 'Exit task '\'''\'''
+ test -w /var/log/rear/rear-lamyer.log
+ echo '2023-05-12 23:56:01.343093205 Exit task '\'''\'''
2023-05-12 23:56:01.343093205 Exit task ''
+ eval ''
[root@lamyer dist]# sudo rear mkrescue
ERROR: '/var/lib/rear/TCG-Opal-PBA/lamyer/TCG-Opal-PBA-lamyer.raw' is not a regular file, thus cannot be used as TCG Opal 2 PBA image.
Use debug mode '-d' for some debug messages or debugscript mode '-D' for full debug messages with 'set -x' output
Aborting due to an error, check /var/log/rear/rear-lamyer.log for details
Terminated
[root@lamyer dist]# cat /var/log/rear/rear-lamyer.log
2023-05-13 00:01:52.257404973 Relax-and-Recover 2.7-git.4856.91e67155.unknown / 2022-07-14
2023-05-13 00:01:52.259541423 Running rear mkrescue (PID 364313 date 2023-05-13 00:01:52)
2023-05-13 00:01:52.261523796 Using log file: /var/log/rear/rear-lamyer.log
2023-05-13 00:01:52.263662659 Including /etc/rear/os.conf
2023-05-13 00:01:52.266651403 Including conf/Linux-i386.conf
2023-05-13 00:01:52.268524118 Including conf/GNU/Linux.conf
2023-05-13 00:01:52.472933731 Including /etc/rear/local.conf
2023-05-13 00:01:52.475198078 ======================
2023-05-13 00:01:52.477174769 Running 'init' stage
2023-05-13 00:01:52.479062836 ======================
2023-05-13 00:01:52.484577809 Including init/default/005_verify_os_conf.sh
2023-05-13 00:01:52.488067666 Including init/default/010_EFISTUB_check.sh
2023-05-13 00:01:52.491583266 Including init/default/010_set_drlm_env.sh
2023-05-13 00:01:52.495801019 Including init/default/030_update_recovery_system.sh
2023-05-13 00:01:52.500100686 Including init/default/050_check_rear_recover_mode.sh
2023-05-13 00:01:52.502452202 Running workflow mkrescue on the normal/original system
2023-05-13 00:01:52.507055874 Including init/default/950_check_missing_programs.sh
2023-05-13 00:01:52.512479565 Finished running 'init' stage in 0 seconds
2023-05-13 00:01:52.517430842 Running mkrescue workflow
2023-05-13 00:01:52.520053087 ======================
2023-05-13 00:01:52.522978317 Running 'prep' stage
2023-05-13 00:01:52.525806284 ======================
2023-05-13 00:01:52.532203614 Including prep/default/005_remove_workflow_conf.sh
2023-05-13 00:01:52.537539953 Including prep/default/020_translate_url.sh
2023-05-13 00:01:52.541610972 Including prep/default/030_translate_tape.sh
2023-05-13 00:01:52.545573320 Including prep/default/035_valid_backup_methods.sh
2023-05-13 00:01:52.549370962 Including prep/default/036_valid_output_methods.sh
2023-05-13 00:01:52.553317887 Including prep/default/040_check_backup_and_output_scheme.sh
2023-05-13 00:01:52.558508894 Including prep/default/050_check_keep_old_output_copy_var.sh
2023-05-13 00:01:52.562318553 Including prep/default/100_init_workflow_conf.sh
2023-05-13 00:01:52.567577044 Including prep/GNU/Linux/200_include_getty.sh
2023-05-13 00:01:52.591878604 Including prep/GNU/Linux/200_include_serial_console.sh
2023-05-13 00:01:52.654600735 Including prep/GNU/Linux/210_include_dhclient.sh
2023-05-13 00:01:52.688035370 Detected an active Network Manager connection 'You shall not passWORD' set up via DHCPv4
2023-05-13 00:01:52.690036020 Auto-enabling DHCP on the rescue system
2023-05-13 00:01:52.694717905 Including prep/GNU/Linux/220_include_lvm_tools.sh
2023-05-13 00:01:52.697094239 Device mapper found enabled. Including LVM tools.
2023-05-13 00:01:52.784432673 Including prep/GNU/Linux/230_include_md_tools.sh
2023-05-13 00:01:52.792039017 Including prep/GNU/Linux/240_include_multipath_tools.sh
2023-05-13 00:01:52.799051266 Including prep/GNU/Linux/280_include_systemd.sh
2023-05-13 00:01:52.812908783 Including systemd (init replacement) tool-set to bootstrap Relax-and-Recover
2023-05-13 00:01:52.816968728 Including prep/GNU/Linux/280_include_virtualbox.sh
2023-05-13 00:01:52.824157708 Including prep/GNU/Linux/280_include_vmware_tools.sh
2023-05-13 00:01:52.830715525 Including prep/GNU/Linux/290_include_drbd.sh
2023-05-13 00:01:52.837446662 Including prep/GNU/Linux/300_check_backup_and_output_url.sh
2023-05-13 00:01:52.843261891 Including prep/GNU/Linux/300_include_grub_tools.sh
2023-05-13 00:01:52.849473063 Including prep/GNU/Linux/310_include_cap_utils.sh
2023-05-13 00:01:52.853481567 Including prep/default/320_include_uefi_env.sh
2023-05-13 00:01:52.861755426 Using UEFI Boot Loader for Linux (USING_UEFI_BOOTLOADER=1)
2023-05-13 00:01:52.866349384 Including prep/default/321_EFISTUB_check_uefi_env.sh
2023-05-13 00:01:52.871196203 Including prep/default/330_include_uefi_tools.sh
2023-05-13 00:01:52.876418824 Including prep/default/340_include_password_tools.sh
2023-05-13 00:01:52.881764412 Including prep/default/380_include_opal_tools.sh
2023-05-13 00:01:52.895903480 ERROR: '/var/lib/rear/TCG-Opal-PBA/lamyer/TCG-Opal-PBA-lamyer.raw' is not a regular file, thus cannot be used as TCG Opal 2 PBA image.
2023-05-13 00:01:52.901563331 Error exit of rear mkrescue (PID 364313) and its descendant processes
2023-05-13 00:01:52.901668175 Exiting rear mkrescue (PID 364313) and its descendant processes ...
2023-05-13 00:01:52.948233343 rear,364313 /usr/sbin/rear mkrescue
|-rear,364842 /usr/sbin/rear mkrescue
| `-rear,364877 /usr/sbin/rear mkrescue
| `-pstree,364878 -Aplau 364313
`-sleep,364879 3
2023-05-13 00:01:52.985070003 Terminating child process 364879 sleep 3
2023-05-13 00:01:53.026135745 rear,364313 /usr/sbin/rear mkrescue
|-rear,364842 /usr/sbin/rear mkrescue
| `-sleep,364894 1
`-rear,364895 /usr/sbin/rear mkrescue
`-pstree,364896 -Aplau 364313
2023-05-13 00:01:53.062401012 Terminating descendant process 364894 sleep 1
2023-05-13 00:01:53.065257240 Exiting subshell 1 (where the actual error happened)
2023-05-13 00:01:54.068730750 Running exit tasks
2023-05-13 00:01:54.077103622 Finished rear mkrescue in 2 seconds
2023-05-13 00:01:54.082250536 Removing build area /var/tmp/rear.YKdcBibgMGZq09J
2023-05-13 00:01:54.093163318 End of program 'rear' reached
jsmeix commented at 2023-05-23 09:33:¶
@lamyergeier
I am not a TCG Opal disk user so I can
neither check how ReaR works with a TCG Opal disk
nor do I sufficiently understand what the
related code in ReaR actually does.
The TCG Opal disk related code was contributed to ReaR
some time ago by @OliverO2 but he is no longer active here.
The info you provided looks inconsistent.
You use ReaR version 2.7 with /etc/rear/local.conf
OUTPUT=RAWDISK
OUTPUT_URL="file:///var/lib/rear/output"
but your sudo rear mkopalpba output shows
... Copying only currently loaded kernel modules (MODULES contains 'loaded_modules') and those in MODULES_LOAD
which does not match ReaR 2.7 with your /etc/rear/local.conf
and
your cat /var/log/rear/rear-lamyer.log output shows
... Command line options: /usr/sbin/rear -D mkrescue/mkbackup/recover
...
... ERROR: The specified command 'mkrescue/mkbackup/recover' does not exist!
which is plain wrong command line syntax (as the ERROR tells)
and also this does not match your 'sudo rear mkopalpba'
Only your last
# sudo rear mkrescue
ERROR: '/var/lib/rear/TCG-Opal-PBA/lamyer/TCG-Opal-PBA-lamyer.raw' is not a regular file, thus cannot be used as TCG Opal 2 PBA image.
makes sense for me because according to what I read in
https://github.com/rear/rear/blob/master/doc/user-guide/13-tcg-opal-support.adoc
I think a successful rear mkopalpba is a precondition
for a subsequent rear mkrescue because the former
creates a PBA image that is then needed by the latter.
[Export of Github issue for rear/rear.]